I did a clean install everything went okay except the sound
Windows see's the sound joystick and video in the device manager but when i go to control panel - sound and audio devices everything is gray
I downloaded the stac97 on the biostar website but eveytime when i'm installing the software it says '' device object not found, restart the system and run setup again '' so i've done that but it was still saying the same sentence
Before i did a clean install the sound was working perfectly so i don't know what the problem is
I also checked the bios for the onboard audio and it's enabled so i coulnd't solve the problem
SOURCE: Orignal cd drivers won,t install sound on biostar TA790GX 128M
i want mother bourd support driver from my laptop
SOURCE: No audio from Biostar g31-m7 te motherboard
check bios setting and v erify that audio codec(AZALIA) is turned on
SOURCE: Hi! no sound?! WinXP Prof 2002,
Hi,
I know this isn't your exact motherboard, but this may help you in some way. Just to make sure the jumpers are set up correctly for the front panel audio. Click HERE and go to page 11 to see the jumper settings. You can also try to do a "Scan for hardware changes" in Device Manager. From what you have written, it seems to me that it's something to do with the audio in the bios, yet you say it's enabled. If this is a problem after installing a new program or operating system, it could be that the new software is to blame.
I hope this helps. let me know if there is anything I can do to help you further
Joe
63 views
Usually answered in minutes!
×