Control board for powerware 9120 6kva ups

https://eaton-upssystems.com/services/

This unit has been replaced by the 9130. It is possible that the original power cell is low in power or not charging to full capacity.

I have a unit I'm parting out. Bill - 5086797432

You will be able to replace the unit with a new one cheaper than getting that board from the manufacturer.

There may be a reason. Too much current draw.
I would recommend to get a better brand UPS.

710-12102-0X - PCBAS 9120 5-6KVA CNTL-1112NN - £107.67 + delivery + VAT from the Manufacturer - Eaton Power Quality Ltd

Greetings!
How many years is your ups working? UPS is usually run by a battery, some of them are disposable and needs replacement. If it does not charge anymore it needs replacement of battery.
Thanks.

your problem could be related to a dispay board or possible CSB board.

u don't need to reboot, if the ups is doing it it may have a board problem

You can download the manual and other literature at
http://www.powerware.com/EMEA/UPS/9120_info.asp

The contacts for support in India are found at
http://www.powerware.com/India/Service_Support/IN_Office_Contact.asp

They offer a battery monitoring software package, at
http://www.powerware.com/India/Service_Support/IN_Battery_Services.asp

You can email support at http://www.powerware.com/pp/Check.asp?key=code1
Good luck