Change language back to english on epson cx4800 all-in-one printe

1. Press the cancel and power buttons at the same time, while the printer is on.

2. Press the blue, green and gray buttons (in this order)

3. Change the menu options with grey button until you get to the "Resets" menu.

4. Press OK. "Country and Language reset" displays.

5. Press and hold OK for approx 2 seconds, then release. The printer will turn off.

6. Start the printer again - it should ask you to select language.

IN MENU SETTINGS SELECT LANGUAGE ENGLISH

You learn to speak English and then everything's okay.

Found manual on web. here is link for you to print out. If you find this helpful, please rate me.

http://safemanuals.com/user-guide-instructions-owner-manual/EPSON/STYLUS%20PHOTO%20RX560-_E


Changing the Language
Displayed on the LCD
Screen
You can change the language displayed on the LCD
screen using the following procedure. Certain type of
products may not have this function.
1. Press the F [Setup] button.
2. Use the l or r button to select Maintenance,
then press OK.
3. Use the u or d button to select Language, then
press OK.
4. Use the u or d button to select the language that
you want to display.
5. Press OK.

Please rate me if you found this information helpful.
Thanks and good luck…

my printer is using some foreighn language not english how do when i want to do my inks do i change it to english?

1. First of all, you must completely uninstall your current driver (with foreign language).
2. Download Epson R290 English Language Driver from here :
http://www.epson.com.sg/epson/drivers/driver_download.htm?dc=1&mode=3&mfalse&catid=1&pid=1259
3. Unplug your printer USB Cable from your PC
4. Run : Setup.exe
5. Follow the instruction, and thats it. You've English Language now :)

I have tried this and it worked :)

Hi-

Try uninstalling the driver and reinstall it. If this doesn't help get back to me.

Thanks for using Fixya

Download a manual and see other answers. Lots of FAQ
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=58608&infoType=Overview

On my RX680 the language setting is in the Maintenance section of the setup menu under Langue.

i have the epson stylus cx3200 and the main printer options are in english (ie number of copies ect) but the rest are in french!