There is an Error 692 : There is hardware failure in your modem.

Make sure you have bluetooth on on both, and that you are connected via bluetooth to your computer.

Turn on pda net on your DI and enable bluetooth dun.

Now go to your bluetooth settings on your computer and double click on your device, a new service should pop up allowing you to enable dun/modem and select that.

right click on your di bluetooth connection on your computer and create a dial up modem.

select the generic bluetooth modem, not the pdanet modem.

Type 123 in the phone number and leave the username and password blank and click connect.

Now you can right click on your DI bluetooth icon on your computer and select connect to the modem connection you just created.

After using my DI as a modem over bluetooth there are a few things to consider.

1. yeah it works great.

2. Its a battery **** fest.

Constant 3g with constant bluetooth = constant battery draw.

I would still recommend using your pdanet via the usb cable, seeing as this will keep the battery level charged, as well as same speed!

Sir I have Chang Jiang W007 Model mobile.. by accidently , the first SIM incoming calls barring password was blocked . also my phone charger unit also failed.. Is there is any solutions for my problems..pls send it to my email ID [email protected] advance thanks..

This error usually comes when you use usb cable to connect the phone to pc . Please try to unplug the cable and plugin the USB cable to another port and try via pc suite to connect to internet. If still it is not working try to connect on another pc via same USB cable to phone. If you are getting the same error still then this means the USB cable is damaged then change the USB cable and you can connect to PC. If USB cable works with other pc then reinstall pc suite or try connecting by creating dial up connection.

have you tried configuring your internet access through your samsung pc studio? if not, open your pc studio, connect your phone and create an internet access through internet connector and try to connect.
one way to check if you can connect to inet by using your phone as a modem, is, surfing the web first using your samsung corby's web browser.
if you can't connect or surf the web by phone browser, it means you still haven't configure your browser profiles to your network provider. ask the right configuration from your network and configure the browser profile first.

good luck..

Thank you for visiting Fixya Forums

Using a Jazjam as a modem:

Notes
• Before activating Wireless Modem, make sure your device has a
SIM card installed, and you have set up a GPRS or phone dial-up
modem connection on your device. For more information about
setting up a GPRS connection, see "To set up a GPRS connection to
the Internet". For more information about setting up a phone dial-up
connection, see "To set up a dial-up connection to your ISP".
Also make sure you have connected your device to a computer (via
infrared, USB or Bluetooth).
• When you activate Wireless Modem, ActiveSync will be disabled
automatically.
To set up your device as an infrared or USB modem
1. On your device, tap Start > Programs > Wireless Modem.
2. In the Connection Type list, select how your device is connected
to the computer: IrDA if via infrared, or USB if through USB cable
connection.
3. To use your device as a GPRS modem, set the GPRS Access
point name. To do so, tap Menu > APN Setting and enter the
access point name.
4. Point your device at the infrared port of your notebook, or plug in
the USB cable adapter between your device and the notebook.
5. Tap Menu > Start.
6. The next thing to do is to add your device as an infrared or USB
modem onto your notebook.
To add your device as an infrared modem to your notebook
1. After you tap Menu > Start on the Wireless Modem screen
of your device, the Found New Hardware dialog box will then
appear on your notebook and will show that your device has been
detected as an infrared modem. In this dialog box, make sure that
Install the software automatically (Recommended) is selected
then click Next.
2. Wait for Windows to finish installing the infrared modem, then
click Finish.
3. You can now connect your computer to the Internet. Follow the
steps in “To dial up and connect to the Internet.”
To add your device as a USB modem to your computer
1. After you tap Menu > Start on the Wireless Modem screen of
your device, your computer will automatically detect that your
device has been connected. The Found New Hardware dialog
box will then appear on your computer.
2. In the Found New Hardware dialog box, select Install from a list
or specific location (Advanced) and click Next.
3. Select Search for the best drivers in these locations.
4. Insert the Getting Started Disc into your CD drive. Select the
Include this location in the search check box. Click Browse
and choose the CD drive and root folder where the modem driver
is located, then click Next.
5. Wait for the installation to complete, then click Finish.
6. Click Start > Settings > Control Panel.
7. Double-click Phone and Modem Options.
8. Click the Modems tab. Select the new modem from the Modem
list, then click OK.
Getting Connected
9. You can now connect your computer to the Internet. Follow the
steps in “To dial up and connect to the Internet.”
To dial up and connect to the Internet
Once the computer recognizes your device as a modem, you can now
use the computer to dial up and connect to the Internet.
1. On your computer, click Start > Settings > Control Panel.
2. Double-click Network Connections.
3. Click File > New Connection.
4. In the New Connection Wizard, click Next.
5. Click Connect to the Internet then click Next.
6. Select Set up my connection manually then click Next.
7. Select Connect using a dial-up modem then click Next.
8. Select the infrared, USB or Bluetooth modem that you previously
installed, then click Next.
9. Enter a descriptive name for this connection, then click Next.
10. If you are connecting to the Internet via GPRS, enter the
telephone number as *99#. Otherwise, enter your ISP‘s dial-up
phone number, then click Next.
11. Under Internet Account Information, you may not need to
enter a user name and password when using GPRS. Just click
Next to proceed.
12. Click Finish to exit the wizard.
13. The Connect dialog box then opens. Click Dial to dial up and
connect to the Internet.
To end the modem session
• On the Wireless Modem screen, tap Done or tap Menu > Stop.

(Please give me a big thumbs up when you rate my answer, thanks.)

hello,

Connect your modem to the phone line and test the modem.

Control Panel-->>Phones and Modems. Click icon. Tab Modem. Highlight your modem, and Click Properties--->>Diagnostics. Verify that everything is OK.

Then Start --->>All Programs -->>Accessories-->> Comunications ---Hyperterminal.

Enter a name for a bogus connection, Click OK
Enter your phone number and dial it. If Phone/Modem connection is OK, you shoul hear the busy signal.
Alternative:Run the Dell diagnostics.

If Modem connection is correct you must then create a dialup connection.
Hope it helps.

Try unistalling and reinstalling the modem drivers.

try go to your control panel open phone and modem delete the samsung modem in there and re install it.