How to do 'mirror' on photocopier

Xerox is famous for not letting parts to amateurs, but here is a site that may help. Had a 5035 for years and changed the fuser lamp. Not that difficult on that model. PARTS for Xerox Brand Copiers

pro 423 doesn't support vista or win 7

http://download.support.xerox.com/pub/docs/WCP_416Si/ocessuserdocs/any-os/en/wcp416_UG_en.pdf

Go to page 8-14 for a step-by-step process.

Please give me a 4 thumbs up if this has helped.

change le drum cartridge

replace drum unit chip

p/l call to xerox cust care center this bater solutions

Here is the xeros link to drivers from A-Z.  There is no workcentre pro 416 listed.  Check your model number and scroll down to workcentre.  Good luck.

http://www.support.xerox.com/go/prodAtoZ.asp?Xlang=en_US

Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ


Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hello sir; The U-9 code means the main control unit/switch board problem, replace it.

U4 code refers to a fuser heat failure, you'll probable find the fuser roll is stone cold .Possible cause is open circuit heater or overheat thermostat popped.Either way you will need to pull out the fuser unit and check continuity of the components