The connection is on hold

Hi
Cellular Digital Packet Data (CDPD) was a wide-area mobile data service which used unused bandwidth normally used by AMPS mobile phones between 800 and 900 MHz to transfer data. Speeds up to 19.2 kbit/s were possible. The service was discontinued in conjunction with the retirement of the parent AMPS service; it has been functionally replaced by faster services such as 1*RTT, EV-DO, and UMTS/HSPA.

your network supports 3G.

Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service ceive data over an Internet protocol which allows mobile phones to send and re (IP)-based network. It enables wireless access to data networks such as the Internet.77 . 2005 Nokia. All rights reserved © Copyright The applications that may use packet data are MMS, browsing sessions, Push to talk, e-mail, remote SyncML, Java application downloading, and the PC dial-up. Packet > Connectivity > Settings > Menu To define how to use the service, select Packet data connection > data . to set the packet data connection to be established when an When needed Select application needs it. The connection will be closed when the application is terminated. to set the phone to automatically connect to an packet data Always online Select network when it is switched on. indicates a packet data connection. Modem settings You can connect the phone using an IR or a data cable connection to a compatible PC, and use the phone as a modem to enable packet data connectivity from the PC. > Settings > Menu To define the settings for connections from the PC, select , activate Active access point > Packet data settings > Packet data > Connectivity Alias . Select Edit active access point the access point you want to use, and select , and enter a nick name for the currently selected access point. for access point , and enter the access point name (APN) to Packet data access point Select establish a connection to an EGPRS network. You can also set the dial-up service settings (access point name) on your PC using If you have set the 121 p. PC Suite the Nokia Modem Options software. See . settings both on the PC and on your phone, the PC settings are used.

Packet data connection not available
Solution ->

• U have to Active internet Pack
• Save Configuration Settings

i have nokia e72. whenever call is received in standby mode, a message is displayed that packet data is active call on hold and when unhold the call it gets disconnectedd

hi...

I wil tell you wh at arrow denotes what, so that you can check which is on your mobile phone

:All calls are forwarded to another number


:A GPRS packet data connection is available.


:A GPRS packet data connection is active.




A GPRS packet data connection is on hold.

thanx

Dear Sir,

Welcome to Fixya Support.
Now a days every cellphone supports GPRS or Packet Data connection.If your phone packet data connection is checked to always online..phone always shows small E symbol besides the signal strenth indicator.So turn off Packet data connection from your phone settings.


I think it solves your problem.


Have a Nice Day!

activate ur gprs first.. ask ur settins frm ur customer care........ then try

you may visit some nokia mobile sites.............

dsl signal / light on modem ..ok
connection to computer ..ok
able to log-in to the internet service provider ..ok

check your IP address setting on the computer, must be set to automatically get IP address, same goes for the DNS setting.