Oven door lock engaged while NOT in cleaning mode with door open. Will not disengage. Cycled main power, cancel button does not work; Oven also inoperable. HELP! Appreciate any tips or tricks to get it unlocked. Thanks. Tom Model FGF378WCCC Frigeidaire Please let me know asap !! at [email protected] I spilled some water on the stove top and the lock on my oven door engaged, the display started beeping and the display was showing F3.  Somehow I was able to open the oven door but the lock is still engaged and I can't close the door and the oven doesn't work.  help!

On most of these ovens, you can either unplug the unit or flip the breaker from the main and keep it off for ten minutes, then either plugs it back in or turn it back on, and then hit and hold the start/cancel button on the control board for twenty seconds. Yu should hear a beep and then you should see the display light up and ask for you to set the time. If it does this, then the reset has worked. If so, put the oven into a self clean cycle and hit start, listen for the machine to come on, and about a minute later cancel the cycle and see if the door unlocks. If that doesn't work, you may have a bad door lock assembly and you will be forced to manually unlock the door.

To manually unlock the door, stick a screwdriver or heavy wire coat hanger in between the door oven and the door lock and see if you can disengage the door lock. If you manage to get the door open, leave the door open and put the oven into another self clean cycle. If after hitting the start button to activate the self clean cycle, you notice the door lock either not moving or getting stuck closed again you will need a new door lock assembly. If after hitting the start button, the door lock seems to be working fine, the door lock had probably shorted out during the cleaning cycle and looks to be okay now.

is the light oven on??? can you see the switch/button that the door would hit against to turn light off?? if so depress button so the lifht goes off, and start a clean cycle.This should make the lock mechanism engage fully. then cancel cycle and should fully disengage lock/latch (you need to depress light switch to trick unit into thinkin the door is closed)

SOUNDS LIKE MEMORIE PROBLEM UNPLUG WHILE STILL ON AND LEAVE OVERNIGHT

Lock disengaged on its own after a day. Oven is now clean, everything working properly.

The F9 code indicates there is a problem with the door lock.

Try disconnecting the power to the range for 10 seconds and reconnecting. Open the oven door and hold the door switch plunger in while you try these things. Put the control into clean for 5 minutes then cancel clean. You must hold the door switch plunger in for the 5 minutes.

Try canceling the clean cycle without putting the control into clean.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Hold oven door light in while touching clean cycle enter up arrow or down arrow then hit cancel. door will unlock.

Plastic explosives, anyone?!
Anyway can the electronics on that puppy can be reset? If not successful either check with mfg or google it. Good luck!

need model number and ill tell you how to open mod number prob at pull out drawer

most of the time a simple fix.... http://www.geappliances.com/search/fast/infobase/10004586.htm
you have to trick the door lock mech into cycling through the cleaning process (takes about 20 seconds)
Print Range - “LOCKED DOOR” flashes in the display

If “LOCKED DOOR” is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch

1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
3. While you hold the door jamb switch in this position, complete the following steps.
4. Press the Clean pad, wait 10 seconds.
5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
6. Wait 10 seconds for the display to clear.
7. The door should unlock and there should not be a need for service.

Manual Switch

1. Press the Clean pad.
2. Close the door.
3. Slide the latch to lock the door.
4. Hit the cancel button immediately.
5. Unlock the door.

If the above does not correct the situation, a service technician will need to check your cooking product. To obtain in or out of warranty repair on Major Appliances, you may call 1-800-GE-CARES (800-432-2737) or schedule service online.

Hold the lock button for 3-5 seconds...