I have a canon pixma ip3500 printer which shows waste ink absorber full contact your service administrator. can i solve this problem myself
It's Very Simple
Just Enter in Service Mode of your printer and clean absorbers count.
To enter in SERVICE MODE
1) Power off Printer
2) Push and hold "Resume" button and then push and hold "Power" button
3) Hold the Power button, then release and 2 times press Resume button
4) Led indicators must change
5) Release all buttons
6) Then printer in Service Mode
(If something wrong, repeat 1-6)
To clean absorber counter,
7) Press "Resume" Button 4 Times and after press Power button. It's all! Your absorber count is EMPTY!
In SERVISE MODE you can do several useful things:
To print Service Nozzles test, press "Resume" 1 time and press Power
To print EEPROM data, press Resume 2 times and press Power.
DO NOT press Resume 3 times and POWER. It will reset some EEPROM data settings
Any Question mail me: ossipenko(prettydoggy)gmail.com
My printer is very broken in this so absorber full,it make reset manual,can helm me
4,236 views
Usually answered in minutes!
pixma ip 2770 gumamit ako ng service tools pag pree k sa main mag hung ang service tools application bakit po pls help me
the ink absorber is full and I am not sure what to do
I have major problems with my only two canon pixma ip8720 ink absorber full and I dont have any solution .is there someone to help please?
×