FLASHING EXCLAMATION POINT

hi Dawn, if the light is flashing all of the time however if the scooter okay in that it does a fair distance etc, i would say there is a issue with the status circuit in the controller.

Regards

When the red exclamation point is flashing slow, something is not where it is supposed to be, bean hopper lid, door, brew mech, water tank empty, dregs box or water tray on dregs container is full. If the red exclamation point is flashing quickly, open the steam valve for pump priming. If pump turns on, and water passes correctly, the light should go off and return to heating stage. If not, we have a blockage or a pump that is not working correctly.

Hi,
The lights on the front of the HP product can be on, off, or blinking (flashing), depending on the status of the product. The lights indicate product status and are useful for diagnosing printing problems.
For more read... HP Support document and HP Tech Support .

Thanks,

Here is a link to your printers manual. It has troubleshooting in it and explains what the error means when you see the picture of the sun with the ink drop & exclamation point blinking. It also has instructions on how to fix the error and stop the blinking.

http://support.dell.com/support/edocs/systems/1710n/en/om/1710_en.pdf

Please take a good look at the front of your printer and make sure that the only thing blinking is the exclamation point. If it is then it means that the cover to your printer is not closed all the way. Try opening and closing the printer to cancel this error.

If there is a picture of a sun, an ink droplet or anything else along with the blinking exclamation point then the error can mean different things.

Don't worry, Please press the Exclamation point, which is telling you some error has occurred while printing or scanning, once you will press the exclamation button that would stop blinking and try to print again, please let me know it works or not

Failed caps on the DM and the Power boards the V26 Chassis DM/Power repair kit from www.tvrepairworld.com comes with instructions and the cas and will usually fix the blinking led.

hi this is a brake warning symbol.this denotes some problem in the braking system.

I suggest that you get the instructions manual, you will find what the icon indicates there... you can also visit a local dealership and have a few chat with the mechanic. I'm sure they will not charge you for a very basic question.

It's a warning to "Check Transaxle". A problem was detected and shifting may be limited. Get it looked at soon.