Question about LG LDF8812 Stainless Steel Built-in Dishwasher

Open Question

LG LDF7811ST, how to replace spring

The rope broke. I got a replacement, but the spring came loose from the top...

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
your_applian
  • 15 Answers

SOURCE: no spring in door

Hi there Mathew, yep your diagnosis sound correct to me the LG dish washers have a string with a plastic lug that conects them to the springs. The plastic lugs and known to brake off the part number for the replacement strings is 4933ED3002A you will need two of these one per side. I hope you find this usefull please contact me if you need any further asistance. Regards Gary.

Posted on Nov 24, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does door open too far and is not horizontal to the floor when open?


Besides spring streaches out over time or one rope breaks. Their are like three spots to hook spring to get tension for door. I just replaces both ropes as one broke and hooked springs in middle hole. Takes more time to pull washer out then to replace the ropes

Oct 31, 2015 | LG LDF6810ST Stainless Steel Built-in...

1 Answer

How do i rewind the recoil spring on my craftsman lawn mower?


Normally these small engines use a clock spring to retract the rope.
Remove the cover on the top and you should find the spring either broken or the tab where the spring end has broken off or jumped out of the mount.
You will need to pre-load the spring with enough tension to retract the rope.
Remove the pull handle from the rope, load the spring and then wrap the rope around the pully holding the pully and spring in the loaded position. place the end of the rope through the hole and tie up the handle. The rope should pull and retract without being installed on the engine.
Best explained here...
https://www.youtube.com/watch?v=tmo6oYOJJ4U

Jun 27, 2014 | Mtd 22" Yard Machine Push Mower

1 Answer

The rope broke when I tried to start the chainsaw. How do I replace it?


Your rewind spring is now sprung. Remove recoil assy ( the part your rope slides into). Remove all old rope remnants and rewind the spring. Install new rope, tie it off and slowly release spring rewinding the rope.

Mar 14, 2014 | Stihl 017 018 Ms170 Ms180 Chainsaw Starter...

1 Answer

Starter rope replacement


recoil spring has slipped out of the hole.pull your starter rope out of the wind up mechanism, insert the spring latch on both ends and put back into housing. with a piece of 3/4 square stock or something the will fit mthe hole start to wind the mechanism spring up tight. with apair vishgrips lock it down so it does not move. insert your starter rope anr release the visegrips. the springwii recoil and pull the rope in.cut off excess rope. good luck

Oct 17, 2012 | Little Wonder 6032 10 Inch Pro Lawn Edger,...

1 Answer

No spring in door


Hi there Mathew, yep your diagnosis sound correct to me the LG dish washers have a string with a plastic lug that conects them to the springs. The plastic lugs and known to brake off the part number for the replacement strings is 4933ED3002A you will need two of these one per side. I hope you find this usefull please contact me if you need any further asistance. Regards Gary.

Nov 23, 2011 | LG Dishwashers

2 Answers

Starter rope won't retract


You have to wind the spring as tight as you can before you put the rope on. Then allow the spring to unwind, pulling the rope onto the spool. Be very careful when you take it apart. Good luck...Lee

May 29, 2010 | Craftsman 22" Rear Bag Rear Propelled High...

2 Answers

The rope broke on my lawn mower and I am trying to rewind the spring, but was advised to buy a complete starter assembly, I need to know how much one is and where can I get one. I bought my lawn mower from...


If your rope broke, there was no reason to take the spring out. The rope can be replaced just by taking the rewind housing off, turning pulley to get rest of old rope out, wind the pulley (and spring) the direction the rope would be pull it when starting. Then , when it's wound tight, back off to align the holes in pulley and cover. Hold it there, stick about an 8' piece of rope from the outside through the pulley and tie a knot. Hold the rope and let the spring pull the rope back into the starter. an tie handle back. Take your housing, and spring to a shop. They can re-install the spring and put on a rope a heck of a lot cheaper that buying that whole assembly.

Jun 16, 2009 | Mtd 22" Yard Machine Push Mower

1 Answer

Starter cord broke went to replace cord and spring came out. how do you rewind and reinstall spring and cord. have lots of tools


Best thing to do is replace the starter rope, if you don't, you're asking for trouble. Get the right length of rope, don't use a longer rope than recommended or you could wrap the spring too tight when you start the motor. I always replace the spring too. It's cheaper than trying to wind up the old one and get it back in. Good luck.

Jun 13, 2009 | Garden

1 Answer

Starter rope broke on yard machine


Take the top off. Remove broken rope. Rewind spring until tight, then unwind one turn. Insert and knot new rope.

Jun 07, 2009 | Mtd 22" Yard Machine Push Mower

3 Answers

Poulan starter rope


to fix starter rope first you must wind spring and place back in housing. just grab spring by middle and wind ,you will have to get it smaller than housing hole. One end should hook to a tab at housing rest of it sets inside itself. once set in housing dont let go, insert rope housing over top & screw in. rope housing should have some return spring to it when pulled. if rope is not tight on return pull simply add one winding to spool. hope it helps!

Feb 14, 2009 | Poulan Pro 16-Inch 38 cc Anti-Vibration...

Not finding what you are looking for?
LG LDF8812 Stainless Steel Built-in Dishwasher Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Mike

Level 3 Expert

4363 Answers

Lollo Pop

Level 2 Expert

134 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...