I have both a Playstation 3 and an Xbox console. Will using an Intec cable for both cause me any problems?

From what I can tell, prices range from $9.99-19.99. Here are a few links to various sites selling this product.

http://www.amazon.com/Intec-Universal-Component-PlayStation-3-630420063056006304900/dp/B0014KKQWW

http://www.shopwiki.com/l/Intec-Component-AV-Cable-(PSP-Slim)

http://www.bizrate.com/wii-accessories/intec-cable-ps2/

I see what you mean, the first handful of sites I checked the results came back empty. I dug a little deeper for you and found that amazon has 2 cables in stock. I will attach the direct link for you below.

http://www.epinions.com/prices/intec-ps2-ps3-wii-xbox-360-universal-component-video-cable?sb=1

Had a similar problem with an official Sony Dual Shock 3 recently. Turns out the solution was a very small pin hole sized reset button on the back of the controller. Have a look and see if yours has something similar, then try connect the charging cable again and sync. Worked on the official one for me anyway :/
Best of luck!

To make a controller work with a new PS3, you need to plug it in with a USB cable before it can be used wirelessly.

first of all the new update for ps3 renders the Intec third party controllers useless...
try just using a wired connection for a while if that works... thats what i did when if first opened my controller.
try listing more in depth details on what your trying and so on.

I have the same problem. I disconnected the key, plugged the controller with its original cable. Turned the PS3 on, turning controller on, pressing Sync, connecting the key in PS3. At that state, the 4 leds start to flash slower as it detects the key. Problem is I can never connect to console. I mean I press Home and it never connects. Its been working fine before I updated PS3 to 3.5 version.

Plug the USB cable that came with the controller into the PlayStation 3.

Plug the other side of the USB cable into the Intec controller.

Press the PS button on the controller. This links the controller to the PlayStation 3.
Any further questions don't hesitate to ask. thanks
A good vote would be awesome!

im sorry but this controller is only meant for xbox and xbox alone!

CONNECTION A:

DO NOT INSERT BATTERIES INTO THE CONTROLLER; THE USB CABLE USED WILL SUPPLY THE POWER TO THE CONTROLLER.


STEPS # 1 – TURN THE POWER ON TO THE PS3 CONSOLE.

STEP # 2 – CONNECT THE USB CABLE TO YOUR PS3 CONSOLE AND CONTROLLER.

STEP # 3 – NEXT PRESSE THE SYNC BUTTON ON THE CONTROLLER, THE CONTROLLERS LED INDICATOR’S LOCATED ON THE FRONT OF THE CONTROLLER WILL START TO FLASH RAPIDLY.

STEP # 4 – CONNECT THE USB RECEIVER TO THE USB PORT ON THE PS3 CONSOLE.

STEP # 5 – WHEN THW CONTROLLERS LED INDICATOR’S LOACTED ON THE FRONT OF THE CONTROLLER START FLASHING SLOW PRESS THE HOME BUTTON.

WHEN THE CONTROLLER HAS ESTABLISHED A CONNECTION BETWEEN THE CONTROLLER AND THE USB RECEIVER ONE OF THE CONTROLLER’S LED INDICATOR’S WILL BECOME SOLID RED.

http://www.amazon.com/Intec-Playstation-3-HDMI-Cable/dp/B000KI99SG