041 348 ERROR CODE XEROX 7435

The 003-319 error on a Xerox 7435 indicates a Video Driver Detection Fail. This error typically occurs when there is an issue with the video driver or the communication between the video driver and the machine. Here are a few steps you can take to try and resolve the issue:

1. Power cycle the machine: Turn off the machine, wait for a few seconds, and then turn it back on. Sometimes, a simple power cycle can resolve temporary communication errors.
2. Check video cable connections: Ensure that the video cable (usually a VGA or HDMI cable) is securely connected to both the Xerox 7435 and the device it is connected to (such as a computer or a server). Disconnect and reconnect the cable to ensure a proper connection.
3. Verify video input settings: On the Xerox 7435 control panel, navigate to the video input settings. Ensure that the correct video input source is selected, corresponding to the connected device. If the wrong input source is selected, it can lead to a video driver detection fail.
4. Update or reinstall video drivers: If possible, update the video drivers on the device connected to the Xerox 7435. Visit the manufacturer's website or use appropriate software to download and install the latest video drivers. If the drivers are already up to date, you can try reinstalling them to ensure they are properly installed.
5. Perform a firmware update: Check the Xerox website for any available firmware updates for your Xerox 7435 model. Updating the firmware can resolve known issues and improve compatibility with video drivers.

Xerox 7435 error code 041-340 indicates a problem with the yellow imaging unit. Here are some steps to solve the error:

1. Power off the printer and unplug it from the power source.
2. Remove the yellow imaging unit and check for any damage or leaks.
3. If the imaging unit appears to be in good condition, reinsert it firmly and make sure it is properly seated.
4. Turn the printer back on and check if the error message has disappeared.
5. If the error persists, try replacing the yellow imaging unit with a new one.
6. If replacing the imaging unit doesn't solve the problem, you may need to call a technician to troubleshoot the issue further.

It's worth noting that error code 041-340 can also be caused by issues with the developer housing, toner cartridge, or other components. If none of the above steps work, it's best to contact Xerox support for assistance.

There is information about your device here >> https://www.youtube.com/watch?v=5o6coqwhZ54 <<

Paste this into the search >> xerox wc 7435 error code 010-337 what is the solution << for more videos...

Regards
Geoff

Possible fix for similar model:

https://www.copytechnet.com/forums/xerox/100578-wc7120t-error-code-010-337-a.html

Reason though to be similar:

https://www.support.xerox.com/support/workcentre-7425-7428-7435/file-download/enca.html?operatingSystem=win7&fileLanguage=en&&associatedProduct=built-in-controller--wc7435-&contentId=122708&from=downloads&viewArchived=false

Dell and Xerox printers reportedly have this error. What model printer is it?

Example of Xerox:

https://forum.support.xerox.com/t5/Printing/WorkCentre-7435-Error-codes-116-324-amp-016-720/td-p/8240

I found a reference to this for you in a Xerox service forum from one of the forum admins, who said:".....try reseating the Transfer Unit and see if that will clear the code. If not please consider contacting your support centre for further assistance."

You can find the message in her forum complete with links on how to do the above at the link below. Good luck! --Mark

http://forum.support.xerox.com/t5/Hardware/6280-gives-error-041-340-MCU-VRAM-error/td-p/22376

6280 gives error 041 340 MCU VRAM error

it is the code for fuser heat control problem. Usually, the unit has its airflow restricted try moving the unit or cleaning it to see if the problem clears

Here is a list of all the error codes

WorkCentre 7425 style Fault Code List Part

Try this link:

041 348 ERROR CODE XEROX 7435

Check around the fused assembly. Is it a new one, or is it one you put to one side as as a spare? If you have a service contract with Xerox you should be able to order a new one. I don't remember all they error codes but the 10 codes usually refer to the fuser unit.
Good luck.

The service tech should do this. The 7435 should be less than 3 months old, and Xerox should fix it. If you bought it from Global, or another company that does not actually employ Xerox technicians, try appealing to them, but I cannot tell you for sure what the outcome will be. Buying from an authorized agency ensures that you can use your "Total Satisfaction Guarantee".