The flashing light on phone

Go to the base station of the D1780, press Play. Alternatively, when all of the handsets are in standby, press Message/Mute (below 0 on the handset) on one of the handsets. Then wait until all new messages have been played back. The blinking light indicates new messages on your answering machine.



You can find this information in the manual on page 16. Uniden has the manuals for their phones on their support site: http://www.uniden.com/scat/dectphones_mnl . The direct link to the manual is http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1780om.pdf . (Note: you will need Adobe Reader or a similar program to view or print the manual.)



I hope this helps.



Cindy Wells

You have unheard messages on the voicemail system provided by your telephone company. This system takes messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

need a make and model to help here

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

That is the message waiting indicator, it is telling you that your Call Notes (Or whatever your service provider calls it's voicemail) has a message waiting. If you do not have a message waiting, you can turn the light of by following these steps:

Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes and
appears in the handset display. In the event your message waiting light gets out of sync with your phone company’s
voice messaging system, you can manually reset it back to the “No messages waiting” state.
Press and hold FIND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
A beep sounds and the message alert tone is reset.

you have to tell the base which is the main hand set and which is the secondary in the base set up menu

To reset the indicator(Red light flashing on handset), press and hold the find handset key for 5 seconds or until the light flashing stops(10 sec).

Press and hold "end" and "#" for more than 5 seconds this will de-register your handset without the base unit.
[email protected]
see for more info. http://www.uniden.com.au/RESOURCES_MAIN/pdfs/ELITE8805_OM.pdf

I had power outage last night now corder at&t 1855 led's keep flashing keeps telling me about power outage before every new message. How do I get rid of the flashing?

Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset
the indicators. With the phone is in standby mode, press and hold find handset on
the base until the paging sound stops (about 5 seconds).