At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Main Tray Problem. Main tray is not detected in not detected by main tray top limit detection sensor or main tray capacity detection sensor within 20 sec of ascending. Main tray upper limit detection sensor or main tray load detection sensor is not detected as Off within 20 sec of main tray descendingMain Tray Problem. Main tray is not detected in not detected by main tray top limit detection sensor or main tray capacity detection sensor within 20 sec of ascending. Main tray upper limit detection sensor or main tray load detection sensor is not detected as Off within 20 sec of main tray descending
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That question would require a book to answer. The simple answer is try turning the paper over. Why?? Check this link: http://dorothyoger.wordpress.com/2011/09/10/put-paper-in-the-copier-right-side-up/
Please follow steps below on how to print 2-sided on your printer:
Printing on both sides of the paper (duplexing) automatically:
Press .
With a document open, click File > Print.
Click Properties, Preferences, Options, or Setup.
Click the Print Layout tab
From the Duplexing area, select Use Printer Settings from the drop-down box.
Make sure the light is on.
Click OK to close any printer software dialogs that are open.
Printing on both sides of the paper (duplexing) manually:
With a document open, click File > Print.
Click Properties, Preferences, Options or Setup.
Click the Print Layout tab.
From the Duplexing area, select Manual from the drop-down box.
Select the Print manual duplex instructions check box.
Press Start.
The printer prints the odd-numbered pages and the instruction sheet, which describes how to flip and reload the paper.
Following the instruction sheet, flip and reload the paper with the printed side facing away from you.
The printer then prints the even-numbered pages on the reverse sides of the odd-numbered pages, completing the two-sided sheets.
Note:
button is not functional with a Macintosh operating system. You can print two-sided documents with a Macintosh operating system by using the settings in the Two-Sided menu of the Print dialog.
Automatic two-sided printing (duplexing) works only with plain paper in letter and A4 sizes. If you want to print two-sided documents on another size or type of paper, use the manual duplexing method.
To return to single-sided printing, make sure the light is not on.
The JAM DUPLEX message appears if you remove a sheet of paper from
the face down output tray after only one side has printed.
The paper sizes you can use with the duplex printing function
are A4, Letter or Legal. If the paper adjustment lever for duplex printing is not set
correctly for the paper size, paper jams may occur and the printing will
be out of position on the page.
Open the
back output tray. Use both
hands to slowly pull the jammed paper out of the fuser unit.
Close
the back output tray. If the paper jam cannot be cleared, go to the next step. Pull the
duplex tray and paper tray out of the printer. Pull the
jammed paper out of the printer Put the
duplex tray and paper tray back in the printer.
Click solved and vote if problem is solved. Otherwise post again
my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 80gm2
Once you have done this, reinstall the paper tray and try printing again. Note:
You may receive a message informing you that another sheet of paper is
jammed elsewhere in the printer. If so, please open the front door and
remove the toner cartridge. Also open the rear door of the printer (and
the duplex option if a duplex unit is installed). Remove any and all
jammed sheets of paper you find. Then try printing again.
If the printer jams again with a 241 PaperJam error message, look to see if it has tried to feed a sheet of paper out of the tray.
Some of the rollers inside the printer have becomes slick with paper dust on the surfaces of the rollers. There is a printer cleaner paper available at most office supply stores and online. It is sticky on both sides. You run a sheet through the printer a couple of times and it removes the dust from the rollers. In your case, run the paper through the duplex unit too.
.
light is on.
button is not functional with a Macintosh operating system. You can print two-sided documents with a Macintosh operating system by using the settings in the Two-Sided menu of the Print dialog.
light is not on.
Ricoh Aficio 1232c
what make and model???
Gremlin11
Main Tray Problem. Main tray is not detected in not detected by main tray top limit detection sensor or main tray capacity detection sensor within 20 sec of ascending. Main tray upper limit detection sensor or main tray load detection sensor is not detected as Off within 20 sec of main tray descending
×