How to Thread machine

Lots of info on the internet.


How to set up your Lil sew sew sewing machine

My lil sew and sew sewing machine 28 April 2013

Quick Start Guide for Sewing Machine LSS505

hi Patricia.
It could be the needle, the tension too tight, mis-threading, the thread weight.
try these links out and see if it helps you.
Sewing Machine Problem 1 Thread Breakage
Sewing Machine Thread Keeps Breaking
Why Does My Thread Keep Breaking While Sew
FAQs Troubleshooting LS 1217 Others Brother
Brother LS 1217 Mechanical Sewing Machine upper thread keeps on breaking...

hi i just bought same thing of trademe and no sewing machine service person in auckland or hamilton knew what to do with it they laughed at it saying it was a silly purchase. i paid 3 times and no one managed to thread it one even wanted 125$ to 'service' it!! just stupid!! my parther however who's an engineer by trade had a good look at it and he threaded it for me and made the tension perfect. now it works perfectly. if you are in the auclkand hamilton area contact me 021538471

Visit us at www.janomestuff.com to avail for a new manual for only $10.00

i need information on threading a 920D brothers serger, on paper so i can take it to my machine to thread

Here is a diagram:

http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Brother_Sewing_Machine_Threading/brother_LS_1217_threading_diagram.htm

When you re thread, make sure you take out your straight needle threads. completely then re thread the entire machine again. If this does not work. Thread your machine turn all tensions to 0 and pull your threads through at the needle point. slowly.

Place thread spool on the spool pin at back right top of machine. From there, thread through 1) rear thread guide (little hook), 2) front thread guide (front hook), 3) down and up through the thread tension dial from right to left so that thread picks up the thread spring check (the little spring on the left of the tension dial). 4) Through the thread take-up-lever, from right to left (the little lever that goes up and down). 5) Through the thread guard and guides (one on the front, one on the needle arm). 6) Through the needle, front to back. Good luck johntrev800 (at) yahoo.com

JANOME MY STYLE 16S INSTRUCTION BOOK WANTED: I have just purchase this second hand sewing machine. Does anyone have an instruction manual to sell or copy? Will pay for expenses. Contact me first on [email protected]. Thank you. Maureen

http://www.singerco.com/resources/threading.html