How to sharpen the blades on my Swiss army knife?

This is the angle between the blade and the stone.

Swiss army knives comewith a lifetime guarantee; you can find more information on their website: http://www.swissknifemall.com/page/948970

Swiss army knives come with a lifetime guarantee; you can find more information on their website: http://www.swissknifemall.com/page/948970

Although the cover is flatly closed and there's no tab/recessed area on the cover, you can still use a watchmaker's knife (looks like a Swiss Army knife but with case opener blade) or even use a Swiss Army knife to open it (pry off, particularly common in less expensive watch).
Be careful, don't try to use the point of the knife, use the blade instead.
Get under the rim and gently but firmly turn the blade upward, popping the cover off.

If the cover is flat, no notches on it, that is a screw-back case. You need a case wrench (screw-back watch case opener) to open (unscrew) the cover. If you try to use a very small flat screw drive and tab (turn) the cover in counter-clockwise direction, be careful because it can cut your fingers.

Hope it helps.

Probaly the first battery had a leak and the contacts are corroded, try to clean the contacts with a contacts spray.

If it is still within the warranty period, it sounds faulty and should be returned to the supplier.

It might be helpful if you spoke to your nearest dealer first to make sure that it is a fault.

Go to "www.wengerna.com/commando-watches".

There are several models of our watch. Choose yours and click on the picture. Details of the watch will appear and "product manual" is listed for you.

For what purpose? Screwdrivers and maybe an adjustable wrench are the only tools needed. You will need an Allen wrench for collimation if this is a reflector style scope.

Orion has very good customer service=== see this link for their phone number,

http://www.telescope.com/control/main/

At the top of the main web site page-

you could try a very weak solution of acid and water mix making sure not to scratch the blade, when the stain is removed smear a film of light oil over the blade hope this helps smirf617

ok. this is easy.

download swiss army knife. and format it using that tool.
OR put in your windows CD and go to the repair console, and you will either be able to select with a graphical interface or tell it to format in fat32 the help command will tell you how to do it all...

But swiss army knife [download] is a lot easier.