Free unlock sony ericsson J108a - Sony Ericsson Cyber-shot C902 Cellular Phone

Many times the charger slot gets loosened.

I need to unlock my SE Cedar too so I can use it here in Philippines.

Only certain basic model mobile phones can be unlocked for free. I couldn't find any free unlocking solution for a Sony Ericsson J108i. If you need to unlock your mobile phone safer, You need to spend something for it. For example, you can visit www.TheUnlockArena.com to get the unlock code for your Sony Ericsson J108i at affordable cost with easy unlocking instructions.
NOTE: This site provides unlock codes for most of the international networks. Ensure that your network is available on the supported networks list.

Desinstalar la aplicacion de Facebook
El descargarlo e instalarlo de nuevo

your phone model doesn't have wifi modem that's why it could be connected with wifi.

best of luck!

If the phone is tied to a particular network all you have to do is to unlock your phone to use it any other GSM network. You can get the unlock code through online. Give your IMEI number & get the unlock code for ur mobile .............You also get through online..........I will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.

Get the unlocking service from your network provider [Telstra] or you may get it from online providers like onlinegsmunlock.com..After getting your code, you may follow the instructions at Mobileunlockguide.com .This will help you to unlock your mobile easily..

When you get into the page Click on the download and download the manual....



http://phonesmanualsguide.com/pdf-sony-ericsson-cedar-j108i-j108a.html

You can stop unauthorized use of your J108a phone by activating phone lock protection.

After activating, you will be asked to enter your phone lock code every time you restart the phone.

The default phone lock code is 0000 (zero-zero-zero-zero). It is recommended that you change this to any four-to-eight-digit personal code.

Note: It is important that you remember your new code. If you forget it, you need to take your phone
to your local Sony Ericsson retailer.

To activate the phone lock:

1. Select Menu > Settings > General > PIN codes > Phone protection > Protection.
2. Select 'On' if you want to enter a lock code every time you start the phone, or select 'Automatic' if you want the code to be entered only when the phone restarts after a new SIM card is inserted.
3. Enter the phone lock code (0000 by default) and select OK.

To unlock the phone:

• When 'Phone locked' appears, enter your phone lock code and select OK.

To change the phone lock code:

1. Select Menu > Settings > General > PIN codes > Phone protection > Change code.
2. Enter the old code and select OK.
3. Enter the new code and select OK.
4. Repeat the code and select OK.




This solution was taken from Sony Ericsson J108a user guide which can be downloaded at:

http://www.sonyericsson.com/cws/download/1/835/750/1284993225/J108i-J108a__UG_EN_1241-2576_1.pdf