Question about Acer AL1916W 19" LCD Monitor
When the monitor is turned on it appears to work - the "acer" name comes up and then the words "no signal". As soon as no signal comes on the sceen it goes to black and the light turns orange. The pc has a new video card installed and tests okay on other monitors, a new cable between pc and monitor has been installed also - still no success
1 Take the monitor out to the street
2 Raise above head
3 Hurl it twards the ground
5 Watch peices fly everywhere
6 Enjoy a cold beer
7 Go out & buy a nice new monitor ( not a acer product )
Posted on Mar 21, 2009
I've had this exact same problem with my new 22" monitor and after trying Acer a hundred times via email I finally received a solution that works!
While the monitor is on, unplug it. Then hold the power button down for 30 seconds. This initiates some kind of "cold" shut-down internally. Then plug the power back in. The problem will be solved-for a while. Weeks or months later it will start again, but now you know the fix!
Posted on Mar 06, 2008
I have two AcerX241W, 24" monitors and both failed in less than a year of purchase. I sent them in to be fixed by the authorized Acer repair center (on my dime). They were returned and worked fine for 6 months. One has failed again. One is still working. I don't think there is anymore warranty. I will NEVER purchase another Acer product.......of any kind.
Posted on Sep 30, 2009
This solution is based on the fact that you can see the computer POST details.
I reinstall the video drivers, works everytime on a Acer 263wb. (8800GT)
-When booting up hold F8
-Enable VGA Mode
-Start-ControlPanel-Device manager-Display Adaptors
-Right click the display adaptor/video card.
-Click Update Driver
-Install from a list or specific location
-Dont search. I will choose the driver to install.
-At this window it usually shows the driver software and simply select the one that matches your display adaptor.
-Reset the computer.
Posted on Jan 18, 2009
I am experincing the same problem with my 20" monitor
Posted on Sep 14, 2008
I tried several monitor reboots and one PC reboot to no effect. THEN I turned off the monitor for about 1 minute, turned it on and it started without problems.
My machine is fairly new, in great shape and a custom built beast so I know there are no "bad PC" problems. What I can consider it that I just finished doing some recommended Microsoft upgrades which included an Nvid Graphics upgrade. I am almost positive it was this MS upload that caused the problem. I think this because on startup I get a "configuring updates" message.
Next solution is to convert 100% to Apple products.
Posted on May 26, 2010
I've had this problem and thought for sure that my monitor X241W is a piece of junk. Nope I was wrong as always. Try doing this: move your speakers away from your monitor. Yep! if your speakers aren't magneticly shielded then they will affect your monitor and or your TV for that matter. I was reading up on THX Speakers when I discovered this factiod. My speakers are well away from my monitor and all is well. Hope it's that simple for you.
Posted on Sep 19, 2008
This works for me seems to be the same all around
answer, though the problem is still aggravating.
What I have done after all the other suggestions is try to work around this issue.
Right click desktop> Open properties> open Tab Screen Saver..
Change the wait to 9999 minutes Click apply.
Box below (Monitor power)
left click Power>
Power Management (always on)
Next is Settings for always on power scheme
Turn off Monitor: Never
System Standby: Never
Then click apply
After this I just turn off monitor Normally......Wait few seconds...... turn back on and wait about 15-20 second move mouse and Problem is gone for me.
This does not cure the overall problem it is just a "Band-Aid" as I see there is an ongoing issue with ACER over all.. As Many suggest By a "Dell"
Oh one other thing as of this reply Mine is only 19 Days out of the Box
Posted on Jan 20, 2008
Had the same problem but have now found a temporary fix,
Right click you desktop and click on "Graphics Options"
Click on the "Multiple Displays" Tab
Click on the scrolldown "Operating Mode" and set to extended desktop.
Only a temporary fix of course, the problem seems to come back after a few days or weeks. This was on Vista so not sure about 7.
Hope it helped.
Posted on Jul 23, 2012
My monitor come's on after a few minutes it's shut down an no power for about 15 minutes
Posted on Nov 13, 2008
Not really a solution -- it's a temporary Work-around:
disconnect the AC power cord (either at the back of the monitor, or at your AC power socket), and then plug back in. While not a permanent fix, it seems to make it go away for some time. No explanation yet as for why this works. (I don't think it's heat related... I tried it out desperation seeing this suggested some place, and only had the plug out for 10 seconds, and it seems to have stopped the behavior (with me, it was a cycle of 10 seconds of black-screen/120 seconds of display time.
Posted on Mar 10, 2009
Have you checked the monitor on another machine? Check to see that no pins have bent on the monitor cable. Since the videocard has been tested on another monitor and worked you need to test the monitor on another machine. If the monitor does work on another machine check the following: Does your motherboard have built in Video? You may need to disable the built in video card in the BIOS. Rehook to the the old video,as the monitor comes on get into the BIOS. "del" key, or "f1" or "f2" it depends on the machine. Check the video display settings and disable the onboard video and make sure the proper video slot (AGP or PCI) is selected. Good Luck, Tim
Posted on Feb 18, 2007
I have a solution that worked for me.It is possible that your video card is fried, if it is your computer won't turn on at all. To check if its fried just pop the case and take it out of your pc, try turning on the computer then, if it works than that is your problem. Luckily i was running sli and i had a 2nd one.Hope this works!
Posted on Aug 03, 2008
Acer Field Service Bulletin
DATE: 04/03/08 NUMBER: mn_029
REVISED - The message "No Signal" sporadically appears on the screen.
AFFECTS: X241 monitors ET.L990B.029
This is an update to the document original published 9/19/07
While the X241W monitor is in use, it might show "No Signal" on screen abnormally.
Sometimes, the monitor may still continue to display video.
Other times the monitor may be go black. For some customers, the problem will correct itself in a minute. These problems often occur during the first 20 minutes the monitor is powered on.
Short term #1 – Unplug the monitor to reset the video controller.
Long term #1 - The main board firmware can be reflashed to a newer version of
firmware by an Acer authorized monitor repair depot. The latest firmwares are listed below.
for monitor with s/n version “00” and ”10” FW = WDTD-D1AP0 V1.03
for monitor with s/n version “12” FW = WDTD-D1SP0 V1.02
for monitor with s/n version “13” FW = WDTD-D2AP0 V1.03
Confirm the firmware has been updated prior to returning the monitor to the customer
or to stock.
When an Acer service repair technician updates the firmware, they should record that
the part IN-MONITOR was used.
6K.ISPVE.001 Tool Kit with a corresponding DB-15 and Serial data cable.
USB-A to USB-B cable for power.
Replace main board if firmware update does not resolve the problem. See spares parts list for p/n.
Posted on Jun 07, 2008
Acer LCD monitors appear to be plagued with this problem. On the internet, I've come across three solutions. One of these may work for you. 1. unplug the LCD monitor from the wall power, doing a hard "power down". Some people report that this kind of reset cures the 'no signal' problem. 2. disable DDC/CI from the on-screen display (OSD) controls. Some people report that disabling DDC/CI solves the 'no signal' problem. (This worked for me.) 3. return your Acer LCD, and buy a Dell 2407WFP, or Apple Cinema HD 23, or go for the big HP LP3065 which has multiple DVI inputs. (This also worked for me.)
Acer LCD monitors appear to be plagued with this problem.
On the internet, I've come across three solutions. One of these may work for you.
1. unplug the LCD monitor from the wall power, doing a hard "power down". Some people report that this kind of reset cures the 'no signal' problem.
2. disable DDC/CI from the on-screen display (OSD) controls. Some people report that disabling DDC/CI solves the 'no signal' problem. (This worked for me.)
3. return your Acer LCD, and buy a Dell 2407WFP, or Apple Cinema HD 23, or go for the big HP LP3065 which has multiple DVI inputs. (This also worked for me.)
Posted on Oct 15, 2007
I had the exact same problem I installed Vista x64 updated there main drivers just for vista and windows...I then installed the new video card drivers form my video card manufacter(nvidia) they would install and then the famous you must restart. I would restart watch the famous microsoft bar then no signal and screen goes black btu vista continues ot load up as i can hear it so i did this
While the monitor is on, unplug it. Then hold the power button down for 30 seconds. This initiates some kind of "cold" shut-down internally. Then plug the power back in. The problem will be solved-for a while. Weeks or months later it will start again, but now you know the fix! ((WARNING do at your own risk ))
And it has worked so far after looking the web fo rabout 1 month and installing vista like 15 times trying every which way to get it to work that did it. and once the new video card driver was installed i installed everythign else and so far havent had one problem yet i even updated with the newest video card driver adn still no problems. So thank you .all i will nwo enjoy my directx 10 and games :)
Posted on Sep 11, 2008
<span style="COLOR: red; FONT-SIZE: 20pt; mso-bidi-font-size: 28.0pt"> <font size="3">ACER Monitor E192HQ :</font><br /> <font size="3"><font color="#000000">I turn on the monitor, then IMMEDIATELY turn on the computer, then IMMEDIATELY I hit repeatedly the F8 key.</font></font><br /></span><!-- from fixya rte -->
Posted on Aug 17, 2010
I have a x241w acer monitor and ge the "no signal" on screen every 10-20 seconds. Like may others, the screen may go blank or the no signal may appear on top of my programs.
I spent a lot of money on this from Best Buy two years ago, and only recently had a chance to use it and have had trouble ever since.
Posted on Oct 19, 2008
I have the same problem, but I know the cause from the beginning, which is because I changed something in the bios, and it's hard to be reversed because the computer is not recognized by the monitor.
The solution is resetting the bios to default, which is done by opening your computer, then and take of the bios battery (simply using your finger), and put it back on. Walaaaa... the monitor is on again.
I hope I help somebody..
Posted on Dec 12, 2014
The problem is the monitors are junk and can't scan the entire screen without going off. the fix is to go to your graphics card setting ie catalyst control and set the adjustments to underscan for the monitor to occupy quite a bit less of the actual monitor space ie going from a 23 to a 21 inch monitor and this fixes the problem but you are stuck with a smaller monitor.
Posted on May 06, 2013
I have an ACER X213W model running with a HP/Compaq 6910p laptop and Windows 7 Ent OS. I had to manually update the VIDEO driver ON the Laptop (nothing to do with ACER monitor drivers!) via "Search the internet for an update". Once updated the driver has changed to Ati mobility radion x2300 video driver. As soon as I rebooted the laptop, the ACER came up in unison with the laptop all is working fine.
Posted on Mar 03, 2013
Hey, it seems everyone is having the same problem. Whats up with acer monitors?? Darn!!...
Posted on Oct 04, 2012
Please allow me to join others in the Acer "experience". I have an Acer S211HL which I purchased through the Overland Park, KS Micro Center on September, 2011. Same problem. Monitor comes on...Acer logo displayed...Energy Star logo then displayed in upper left hand corner and then....no signal. The odd thing is shortly afterward I hooked up the monitor to my laptop...and it worked fine. So, now I'll try with the desktop again. But, if this doesn't work, it looks like there are some potential solutions posted here. Has anyone contacted Acer for a refund or exchange? It seems with so many people having the same problem, there would be a recall...or the company would replace through their retail distribution outlets. But, given the times we're in...
Posted on Jul 06, 2012
Me too. Same issue. Acer Logo then 4 secs later nothing.....
Posted on Jun 30, 2008
I have had the same "no signal" for quite a while now. i just kept (annoyingly) turning my monitor off and back on, then reset it w/the "auto" button. just yesterday i brought my pc to a friends house and he wanted to see how his xbox 360 looked on it, so i let him hook his vga cord to it and try halo. when i hooked up to my monitor via dvi cord...the problem was gone. havent seen it again yet (fingers crossed).
Posted on Apr 06, 2008
I recently hooked my laptop to my tv to watch movies, but now I can't seem to get the function when I press the Fn+F5 key.
Posted on Nov 26, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: acer al1922 monitor no signal:
If it does the same with other PC then you need to open it up and first thing to look for are bad caps in the power supply, see example of failed monitors due to bad caps, transistors, transformers, lamps: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside, and always replace with good quality caps such as PANASONIC FM or FC series from DIGIKEY.
Posted on Mar 23, 2010
Tips for a great answer:
Mar 02, 2015 | Computers & Internet
Jul 13, 2011 | Acer P191WBD LCD Monitor
Jun 08, 2011 | Acer X193W LCD Monitor
Mar 23, 2010 | Acer AL1916W 19" LCD Monitor
Jul 23, 2009 | Acer AL1916W 19" LCD Monitor
Jun 27, 2009 | Computers & Internet
Apr 24, 2009 | Acer X241Wsd Monitor
Mar 20, 2009 | Acer AL1916W 19" LCD Monitor
Jan 12, 2009 | Acer AL2016 W 20" TFT LCD Monitor
Mar 17, 2017 | AcerView F51 15 in. Flat Panel LCD Monitor
May 05, 2014 | Acer AL1916W 19" LCD Monitor
124,554 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: