Can't get webcam configured on my emachines computer
Just got a new emachines computer, have isp with a local internet service provider. I have a old wecam with out the device cd and the computer identifies it as being a xerox workcentre pro scanner, but i can't get anything but the audio to operate.
On my laptop i want to take videos and take pictures with my built in web cam, its a emachine laptop.On my laptop i want to take videos and take pictures with my built in web cam, its a emachine laptop.
i have a emachine computer and can not get my camera to work. It is saying that usb is not recognize my web cam but for some reason it recognize everything else. what can i do
i have a emachine computer and can not get my camera to work. It is saying that usb is not recognize my web cam but for some reason it recognize everything else. what can i do
It's presumably not a document scanner. Do you know what model it really is, perhaps stamped into the plastic? Can you click on Start: Run: devmgmt.msc, or Start: and then in the question box type in devmgmt.msc to see what it is?
Alternately, you may be able to run the free RadarSync app fromhttp://www.radarsync.com ... It's a rather flawed piece of software, but sometimes it helps.
We have to know what the webcam is to know how to help you.
It's presumably not a document scanner. Do you know what model it really is, perhaps stamped into the plastic? Can you click on Start: Run: devmgmt.msc, or Start: and then in the question box type in devmgmt.msc to see what it is?
Alternately, you may be able to run the free RadarSync app from http://www.radarsync.com ... It's a rather flawed piece of software, but sometimes it helps.
We have to know what the webcam is to know how to help you.
You can't post conmments that contain an email address.
Re: Can't get webcam configured on my emachines computer
Hay everybody i have a emachine laptop and i dont know how to set my web cam so i looked in my emachine quick guide book and see will it tell me how to set and i did and if you have a emachine computer and you dont know how to set up web cam look in your emachine quick guide book if you still have it and it will tell you a little bit how to set it up>!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Procedures vary by ISP (Internet Service Provided) Use the customer service phone number or e-mail for your new provider and obtain the procedures for retrieving your old data. If your old provider had a way to check your e-mail online then you should just be able to login to your old account and retrieve the information, but it should have been backed up before you changed ISP. You may have deleted the old account and now you are just SOL.
You shouldn't have to configure anything except the PC's should have IP and gateway set to auto.
Here is how it works:
A router connects two separate networks and manage the traffic between them.
In most home network applications the router connects your local group of computers and devices known as the LAN with the Internet, commonly called the WAN or Wide Area Network.
The router usually assigns unique Local IP addresses to all of the devices connected to it via a service known as DHCP. The addresses assigned by your router are private addresses http://en.wikipedia.org/wiki/Private_net... and are not routable across the Internet.
Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks. Computers that are connected to IP networks must be configured before they can communicate with other computers on the network. DHCP allows a computer to be configured automatically, eliminating the need for intervention by a network administrator. It also provides a central database for keeping track of computers that have been connected to the network. This prevents two computers from accidentally being configured with the same IP address. http://en.wikipedia.org/wiki/Dynamic_Hos...
Your cable or DSL modem will get a Public WAN IP address from your ISP's DHCP service. These public IP addresses are leased in blocks by your ISP and are Internet routeble. The modem is connected to the WAN port on your router. The router will manage the traffic between the devices on the LAN and the Internet.
If your 5 port switch is connected to one of the router's LAN ports and router's DHCP is on then it will configure the clients attached to It automatically.
The reason why your internet light is red for the actiontec gt701-wg is because it is not yet configure. You need to access the gui of this router. enter the username and password for your internet connection. You can contact your ISP provider so they can walk you through for the steps on how to configure your new router.
The old router has green light because it was already configured by your ISP provider.
There are a problem with LAN connectivity.First you have to install the LAN driver compatible with VISTA not for XP.After that you have to call to ISP provider to re-configure your system on LAN .
-- who is your internet service provider -- what is the operating system of your computer? -- is this working fine before or is this a brand new router
you may try this and see if this help solve your problem. make sure your computer is directly connected to the router
Step 1: Shutdown the computer. Step 2: reset the router while power on then Unplug the router’s power cable. Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds. Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable. Step 5: Plug in the router's power cable once the modem’s lights appear stable. Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.
if this still didnot work, upgrade the firmware of your router
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work
-- who is your internet service provider -- what is the operating system of your computer? -- is this working fine before or is this a brand new router
you may try this and see if this help solve your problem. make sure your computer is directly connected to the router
Step 1: Shutdown the computer. Step 2: reset the router while power on then Unplug the router’s power cable. Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds. Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable. Step 5: Plug in the router's power cable once the modem’s lights appear stable. Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.
if this still didnot work, upgrade the firmware of your router
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work
if you are still having trouble configuring your device, try to call supportrix and use supportcall as your promo code for 1 free technical support.
-- who is your internet service provider -- what is the operating system of your computer? -- is this working fine before or is this a brand new router
you may try this and see if this help solve your problem. make sure your computer is directly connected to the router
Step 1: Shutdown the computer. Step 2: reset the router while power on then Unplug the router’s power cable. Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds. Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable. Step 5: Plug in the router's power cable once the modem’s lights appear stable. Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.
if this still didnot work, upgrade the firmware of your router
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work
if you are still having trouble configuring your device, try to call supportrix and use supportcall as your promo code for 1 free technical support.
-- who is your internet service provider -- what is the operating system of your computer? -- are you using a wired or wireless computer in configuring the router?
you may try this and see if this help solve your problem. make sure your computer is directly connected to the router
Step 1: Shutdown the computer. Step 2: reset the router while power on then Unplug the router’s power cable. Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds. Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable. Step 5: Plug in the router's power cable once the modem’s lights appear stable. Step 6: Power on the computer on and configure the router settings Step 7: test the Internet connection.
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work
First I will need to know the type of ISP service you have, T1 - DSL - ADSL - CABLE - etc. And the connection type, STATIC IP - DYNAMIC IP - PPPOE - etc. BPCS
In general the Wan port of the router gets
connected to the modem (box supplied by your internet service provider or ISP) where the computer used to connect and the
computer connects to the switch portion of the router which often has 4 or more
ports. The router has configuration options that must be set to comply
with your internet service providers (ISPs) requirements. These can often be found on his support web site.
If you can provide the link to the website I can assist with the
search. Otherwise I will need the name of the ISP. If this ISP is cable
related like Road Runner I will need the associated cable provider. I
will also may need to know the country, city and state in which you are
located as some ISPs have geographic differences in equipment.
Depending on what that information determines I may also need to know
the Manufacturer and Model of the Modem -- probably the box supplied by your ISP. It would also be helpful to
know if you got the router used or new. Used routers may have been
configured by their previous owner and require additional changes to
new routers with factory default settings.
All of the above information may
lead to the determination that maybe we must enter a static IP address
into the router, maybe we need to provide for PPPoE login for the
router, maybe we need to configure the modem to allow the router to
perform the PPPoE login, and several other such items. This is probably
not a one reply solution.
To provide detailed information concerning that I will need to know the model number of your Belkin Router.
Cannot figure out my webcam on my emachine.
I HAVE NOTEBOOK N I DONT KNOW HOW 2 WORK MY WEBCAM ON IT HELP .........
On my laptop i want to take videos and take pictures with my built in web cam, its a emachine laptop.
i have a emachine computer and can not get my camera to work. It is saying that usb is not recognize my web cam but for some reason it recognize everything else. what can i do
It's presumably not a document scanner. Do you know what model it really is, perhaps stamped into the plastic? Can you click on Start: Run: devmgmt.msc, or Start: and then in the question box type in devmgmt.msc to see what it is?
Alternately, you may be able to run the free RadarSync app fromhttp://www.radarsync.com ... It's a rather flawed piece of software, but sometimes it helps.
We have to know what the webcam is to know how to help you.
×