Question about Frigidaire FAC124 wall/Window Air Conditioner
I removed heater checked power on heat mode connections to heater which was around 320 ac. Seems too high. Is that the problem if not how can I check heater while off unit. thanks
There is probably something going on with the heating part of the unit, and so I would probably look at that part of the appliance if you know where to look. If you aren't sure where to repair it at, I would get a repairman to come and look at your air conditioner. It can be very difficult to fix an appliance such as this if you aren't sure what to look for! http://www.honestairinc.com/ac-repair-replacement
Posted on Oct 27, 2014
First of all, do you get cool air when it's switched to cool? We want to make sure that the freon in the lines is still good and that you don't have a broken line somewhere. If you don't have heat, it could be a number of things. My guess would be that you have a blown fuse, or a broken circuit along the way. I would put up a voltmeter to some of the inner parts of the board and check it that way.
Posted on Oct 03, 2014
Hi and welcome to FixYa,
Initially, pls check the continuity of the heater element itself. Additionally, almost always, heaters have a thermal cut-off in series with the supply line. This is different but in addition to the thermostatic switch that regulates the switching off temperature. Both the thermal cut-off and the thermostatic switch could also be checked with a continuity tester. Normally, both should read 0 ohms. Of course all continuity/resistance readings should be performed with the unit unplug.
The "320 ac" reading is unrealistic, perhaps you can try reading from the mains/outlet and compare.
Good luck and Thank you for using FixYa. Happy Holidays.
Posted on Dec 08, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 13, 2018 | Water Water Heaters
Apr 09, 2014 | Honeywell Programmable Thermostat Heater
Jan 29, 2012 | Bosch PowerStar AE125 AE125 Whole House...
2-Canister for the heater element.
3-Hi limit thermostat. This thermostat is a
safety thermostat in case the dryer severely overheats. When this safety
thermostat is defective, it should raise a red flag for air flow problems.
4-This is the terminals of the heater element
that is inside the canister.
5-Thermal fuse that controls motor run.
6-Control thermostat. This is the thermostat
that controls the cycling of the heater in high heat mode.
7-Heater for low heat. When you select low
heat, 110V is sent to this heater that the control thermostat sits in. The
heater helps cycle the control thermostat faster, therefore you get less heat
than the high heat mode.
please comment on these solution by saying how helpful.mean vote.
Dec 23, 2010 | Dryers
Feb 27, 2010 | Whirlpool GEW9250 Electric Dryer
Sep 29, 2009 | Rheem 40 GAL ELEC TALL Water Heater 6YR SC...
Jul 11, 2009 | Kenmore 62602 Electric Dryer
Jun 24, 2009 | 1999 Ford Taurus
Mar 18, 2017 | Heating & Cooling
Nov 21, 2007 | Dryers
Aug 04, 2013 | Frigidaire FAC124 wall/Window Air...
3,889 people viewed this question
Usually answered in minutes!