Canon Powershot A75 blurred LCD display

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check this link for more info.

Applicable cameras include: A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 30/30a/200a/300a/D320/400/ 450/500

Possibly the same problem I just had with my A75 (and shared with another post here).

Below the LCD are two buttons (versus four on the A70). The button on the left is the Print/Share button, which is new to the A75, while the display button (DISP.) toggles the LCD and what's shown on it on and off.

Hope this works.

Did you get a solution to your problem? I am experiencing the exact same thing with my A75. Still takes pictures and displays them for the 2 second preview, then back to black. And they download fine, too. But I get the same black screen in every mode except stitch assist and movie mode. Thanks.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
　
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
　
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Try setting camera into Macro mode. Its the button on the rear which looks like a tulip. Press it again to return to normal shooting.

I HAVE CANON POWER SHOT 620 DIGITAL CAMARA. NOW I WAS NOT ABLE TO SEE ANY IMAGE IN LCD MONITOR, LCD BECAME WHITE, TELL ME THE SOLUTION

If you get a blank screen and the camera is on,there are two ribbons to the LCD one (the smaller one) is power to the screen. the larger ribbon is the data lines. If the camera is on the problem is a loose connection of one or both of the ribbons. Hope this helps Jerry

Which mode are you shooting in?
You may have adjusted the exposure compensation so everything is washed out.

Whatever the cause, your images are overexposed. Try shooting in auto and the camera should take over the settings, but if you are in other modes, check your shutter speed, aperture, & ISO also. These are all things that can cause too much light and wash the picture out/OVEREXPOSE.

If you have any other questions or can give me more details, just ask!

Hope this helps!

Think it might be your batteries. 700mah batteries are pretty weak by today's standards (most are at least 2,500 mah these days). I'm guessing your batteries are several years old? If so, they're really only meant to have a usable shelf life of a few years, whether they are used or not. Recommend trying a new set of rechargeable batteries.