Power cord+patton model 1010 style SFE-74SP - Patton (HASF1016UC) Stand (Pedestal) Fan

https://www.amazon.com/s?k=fan%2Flight+grill+for+a+patton+bath+exhaust+fan+model+7100L&ref=nb_sb_noss

u can get a replace blade from hard wares and fan shops also try ebay and oztion

Is it metal or plastic?

Must be an older model heater. All the recent ones have a 3 prong plug. Especially, since the recall a couple of years ago on the PUH680-U Heater.

Yes, there is/was a recall on some Patton Heaters, but I don't recall if your model # is one of them. For more info search Google for Patton Heater Recall Notice and you'll find the correct site.

I saw your post and I encourage you to report your problem to The U.S. Consumer Product Safety Commission. I called them to report the problem. The number to the company (Patton) is 763 444 8567. The number to The U.S. Consumer Product Safety Commission is 1-800-638-2772. The U.S. Consumer Product Safety Commission will take your report and if you know others that have this product and they have experienced the same thing encourage them to call and report it. The heater I had melted unto a ultility extention cord and was smoldering. It could have cause serious injury or damages to me and my family.

If this product could have injured you as well. The are a public hazard and need to be recalled.

There is a power cord.. dont think there is any power button..
On the front - to the left of the digital screen - the button that says Ans. Mode - hit that so that the screen says FAX.. And you should be set..

If you are up to disassembling your motor, you will find a thermal cutout near the windings which frequently fails open. Replacements are readily available, or just jumper it out. If the bearings are shot or the windings burned you're out of luck. Trust me, a new motor will cost more than a whole new fan.

Hello

This would seem to be the motor heating up and cutting out on a thermal overload. Check to see if the motor area is clean and that the fan blades are clean. To clean the motor you can blow compressed air through it. To clean the blades disassemble the cover remove the blade and clean with a mild soapy solution.

I found something on amazon, take a look here: Emerson Fans Moving Air In Style . I hope I have helped. Cheers