There are any number of reasons why it won't play. The loading basket is jammed, the video tape has got tangled up in the mechanical section of the vcr or the loading gears are stripped. Unplug machine and remove top, [screws side and back] if the tape is spewed carefully remove by cutting it and clean tape particles, for any other problem have a technician check it out.
SOURCE: Sony RDR-VX525 VCR / DVD
Hello
It has a switched mode power supply [SMPS] regulator inside it. You have located the fuse in itself. As far as fuse is OK, either switching device or mains rectifier diodes and load ressistor should be checked. There is no direct short circuit inside that board, if so fuse will fire up. It is very difficult to an unexperienced person, who is not have sound knoledge in digital elctronics; to rectify this problem. If you are experiecied, go forward. If not, it will be best to replace the power control board. It is available on most of the electronic component spare part shops at your town. There is a number printed on its printed circuit board and it should be noted. The number must be the exact one, if you replace the board. Take out the board from the set, and keep it with you as a sample, when you go to buy a new one. If you are not confidence in this work, never do nothing, and get it repaired by any experienced service personal. OK.
1,365 views
Usually answered in minutes!
×