Anonymous Posted on Dec 05, 2008

Lg LDS 5811st IE code

IE Code, i have checked the inlet filter and hose and all is clear. The paddle you speak of in another post that could cause the IE Code, should it be replaced or the whole part labeled MO90 float assembly?

Thansk,

Chaz

Anonymous May 11, 2010

I was not receiving the "Ask Me" questions from Fix-Ya due to technical problems with the site. If you still need assistance with this problem, send me a comment with the serial number of the unit, which may point to a possible problem / remedy.

1 Answer

Jeff Meyer

Master 423 Answers
Posted on Mar 29, 2009

Jeff Meyer

Master

Joined: Jan 07, 2007

Answers

423

Questions

Helped

287456

Points

1081

With an LG 5811 diswasher, when the IE error code is not caused by kinked hot water hose or blocked screen, the next step is to measure the electric resistance of the Inlet Valve. (950-1300 ohms)

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

1E code display. Checked water pressure, changed inlet valve and float. Still 1E code

You need to check the voltage on the inlet valve coil terminals to see whether the main control board is actually switching the valve on to take in water.
If not replace the main control board PCB as this is the only other problem remaining.

Read full answer

Mar 08, 2015 • LG 24 in. LDS 5811ST Stainless Steel...

0helpful

1answer

Gets a 1E code. already checked water is on

Hi shadyron11,

The IE error you are seeing means Inlet Error, this shows because your dishwasher is not getting enough water through in a specific time frame - Please check the following:

- Is the Inlet hose kinked in any way? (This could lead to low water pressure to the solenoid) Straighten it.
- Is the Inlet hose filter (Found when unscrewing the hose form the inlet on the machine) dirty? Clean it.
- Is the tap completely open? (Low pressure)
- Has your home gone under any plumbing alterations? (This could have also caused low water pressure - Too little water)

If all of these come back OK, and it still gives the same problem, I'd suggest replacing the inlet valve (Found on the opposite side of the inlet pipe - inside your Dishwasher), could also be a pressure switch (Found at the bottom of your Dishwasher - accessible from the bottom).

This should solve any problems.

Kind Regards :-)
Jedemeyer1

* If you found this solution helpful - please rate it

Read full answer

Jul 08, 2011 • LG 24 in. LDS 5811ST Stainless Steel...

1helpful

1answer

Does not fill with water e1 code

1E means - Water inlet problem >Condition : Not reached to the normal water level in spite of 10 minute water supply

Water supply problem. The inlet hose is kinked. The water pressure is to low (10psi) Inlet valve. The inlet water valve filter is clogged. The hall sensor. The impeller of Air guide is bound. Remedy : Check resistance of inlet valve ( 950-1300ohms) Clean valve. Check pressure. Replace the Air braker.

Read full answer

Mar 29, 2010 • LG 24 in. LDS 5811 Built-in Dishwasher

0helpful

1answer

I have an LG dishwasher that keeps giving an 1E error code. The code means water inlet trouble and recommends the following. Check clogging of water inlet hose(or hose twist or freezing) Check if it's...

Try replacing the water inlet solenoid valve (it may have an open coil). The water line goes directly to it.

Read full answer

Nov 25, 2009 • LG 24 in. LDS 5811ST Stainless Steel...

0helpful

1answer

What does the trouble code "IE" mean

IE Error = Water Inlet Trouble - Check water inlet and outlet hoses for cracks, kinks, sponyness, and check the water supply.

http://www.yellow-mini.co.za/dishwasherfromhell/

Read full answer

Oct 29, 2009 • LG 24 in. LDS 5811ST Stainless Steel...

2helpful

1answer

Ie error code

The Water Supply Tap is closed. The Water Supply is shut off. The Inlet Hose is kinked. The Water Pressure is very low. (below 10 psi) Inlet Valve is OK? The filter of Inlet Valve is clogged by impure water. The Hall sensor is OK? The Impeller of Air Guide is bound
Measure the electric resistance of Inlet Valve. (950-1300 ) Clean the filter of Inlet Valve. Check the frequency of Inlet Water by the Test Mode. Replace the Air Braker.

Read full answer

Sep 20, 2009 • LG 24 in. LDS 5811 Built-in Dishwasher

0helpful

1answer

LG LDS 5811ST still getting the IE error after several fix tries

If Hall sensor is OK? Air break replace next PCB
if there is enuf water ?

Read full answer

Aug 18, 2009 • LG 24 in. LDS 5811 Built-in Dishwasher

0helpful

1answer

My LG LDS5811ST has error code of IE Where do I

1-Check if the water Inlet Hose is kinked.
2-The Water Pressure is very low.
(below 10 psi)?
3-Inlet Valve is OK?
The filter of Inlet Valve is clogged
by water filter?.
The Impeller of Air Guide is bound

Read full answer

Jul 03, 2009 • LG 24 in. LDS 5811 Built-in Dishwasher

1helpful

1answer

LG Dishwasher ie error code problem

IE is inlet error, displayed when "Not reached to the normal water level in spite of 10 min. water supply"

Possible cause:

The Water Supply Tap is closed.
The Water Supply is shut off.
The Inlet Hose is kinked.
The Water Pressure is very low.(below 10 psi)
Inlet Valve is OK?
The filter of Inlet Valve is clogged by impure water.
The Hall sensor is OK?
The Impeller of Air Guide is bound.

Remedy:

Cut power by tripping circuit breaker or unplugging power cable for ten minutes.
Take action on Water Supply device.
Measure the electric resistance of Inlet Valve. (950-1300 )
Clean the filter of Inlet Valve.
Check the frequency of Inlet Water by the Test Mode.
Replace the Air Braker.

Read full answer

Oct 31, 2008 • LG 24 in. LDS 5811 Built-in Dishwasher

0helpful

1answer

Trouble code LE

I believe that your error code is "IE". If so,its relates to water input problem Check first the filters on the inlet water line (both sides). Then, if problem still exist - check that the inlet water valve works(it is an electromagnet valve, located at the pipe's entrance to the machine)). If it doesn't work, test that it get power. In case it get power and doesn't work - You should replace it. Be aware you should disconnect the power cable from machine before doing it !!!! Good luck

Read full answer

Sep 13, 2007 • LG 24 in. LDS 5811ST Stainless Steel...

Not finding what you are looking for?

View Most Popular

24 in. LDS 5811 Built-in Dishwasher

Dishwashers

1E code display. Checked water pressure, changed inlet valve and float. Still 1E code

LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

533 views

Ask a Question

Usually answered in minutes!

Have a manual for LG 24 in. LDS 5811 Built-in Dishwasher? Or just drag it here!

Related Topics:

Lg LDS 5811st IE code