I have exactly the same problem and the only way I've found to fix it is to unplug the battery pack in the handset for a minute, then reconnect and place the handset back in the base. The phone then resets and begins to work again. However, this solution is clunky and inconvenient.
I have exactly the same problem and the only way I've found to fix it is to unplug the battery pack in the handset for a minute, then reconnect and place the handset back in the base. The phone then resets and begins to work again. However, this solution is clunky and inconvenient.
exactly the same. I have a base set plus a remote and on many occasions we get no dial tone..... just two beeps. This may last up to an hour and then suddenly they both start to work again...........help!!!!!!
exactly the same. I have a base set plus a remote and on many occasions we get no dial tone..... just two beeps. This may last up to an hour and then suddenly they both start to work again...........help!!!!!!
I also have this problem. Additionally my answering machine works and people leave messages but I can't talk to them. I also have this problem. Additionally my answering machine works and people leave messages but I can't talk to them.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may need to replace the battery, or let unit charge 12-18 hours without it being plugged into telephone jack-proper recharging method. You should have done this right away when it first came home.
I think this may be the answer. With multiple handsets reading "Please register" and a "working" base station (w ith dial tone). If you bring the remote units to the base station and place them on hte base, they will register and stay registered after you return them to the remote base. It doesn't say this anywhere in the instructions as it gives you the impression the remotes will register from their own base.
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank [email protected]
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
I have exactly the same problem and the only way I've found to fix it is to unplug the battery pack in the handset for a minute, then reconnect and place the handset back in the base. The phone then resets and begins to work again. However, this solution is clunky and inconvenient.
exactly the same. I have a base set plus a remote and on many occasions we get no dial tone..... just two beeps. This may last up to an hour and then suddenly they both start to work again...........help!!!!!!
I also have this problem. Additionally my answering machine works and people leave messages but I can't talk to them.
×