Question about Pioneer inno2 Portable XM Satellite Radio Receiver with Home Kit - Black

3 Answers

My pioneer inno2 don't sent any fm signal to the car stereo

I can't listen any music thrue the radio in my car, I have the same FM frequency in the inno2 and the stereo in my car but I can't listen nothing, Is not the car radio because I try another Inno2 that I have in my other car and that one work great, I changed the car kit and either work, I try it in another car and only hear the music but very very low and bad signal, everything is hook-up right and I would like to know witch is the problem and how fix it. I will apreciate who could help me. I have the same problem!

Posted by on

  • mgross41 Dec 07, 2008

    I have this inno radio hooked up in a car that works fine with another inno radio. I did this to eliminate the car stereo, car cradle and antenna as problems (or so I thought). I did this when the radio didn't work in the new car I was going to use this in. Radio picks up xm when not connected to the car but nothing comes through car stereo when in the cradle even on multiple frequencies.

  • mgross41 Dec 07, 2008

    Added sure connect to the other car and it solved the problem-don't know why it wasn't needed with the one receiver but that fixed the problem!

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

HI
You may have an intermittent switch or possibly a shorted or broken wire. As for the radio, I'd yank it and put an after market deck in. GM radios aren't known for their quality. But, you could check the back of the radio to see if the antenna lead is plugged in securely.
Hope this helps.

Posted on Dec 07, 2008

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 201 Answers

Make sure you dont have a frequancy clash to this could blank one transmitter out hopes this help, change your freq on the transmitter tune yur tuner to see..

Posted on Dec 07, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Seem issue with the antenna cable. let me check for more updates.

Posted on Dec 05, 2008

  • Legin Varghese
    Legin Varghese Dec 05, 2008

    It seem antennae has a fault or the antennae cabling has an issue.
    Try these..

    1. First check to make sure the antenna at the back of the radio has not come loose.

    2. Remove the plastic cover on the front passenger door threshold held in place by three pressure clips.

    3. Peel back the carpet on the front seat passenger floor.

    4. Locate the coax antenna cable running along the side.

    5. Reconnect the two pieces of antenna that have come loose.

    6. Roll the carpet back, and re-install the threshold cover.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a way to play my IPhone music on Hyundai Accent 2005 Stereo? It's annoying that I have to use a CD.


Play music through USB in the car - Windows Central Forums

forums.windowscentral.com/.../209188-play-music-through-usb-car.htm...
Dec 19, 2012 - 25 posts - ‎18 authors I own a Hyundai Sonata 2012 which has a USB port that worked perfectly for listening to music on my iPhone. ... and it SUCKS. i want to be able to charge my phone via USB while I listen to music. .... I even bought an ALPINE stereo head unit and tried that, as they supposedly work with NOKIA phones, but.

Oct 21, 2015 | Hyundai Cars & Trucks

Tip

Connecting an iPod Without a Car Stereo


<p>Newer cars often come with adapters to connect an iPod to a car radio, but you can still listen to your favorite lists, if you do not have a car stereo at all. Portable electronics can be used to connect the iPod to speakers, and play it on your car. <br /> <p><br /> <p>1. Purchase an adapter FM radio transmitter for your iPod. It will stream music from your iPod to a low-frequency power, which can be captured by a radio in your car. For best results, use a transmitter with a power adapter 12 volts, you can power adapter car "cigarette lighter" power outlet instead of batteries. <br /> <p><br /> <p>2. Place a "boom box" radio in your car stereo. For purposes of the iPod, the older model, if you have done. All you need is a working radio and decent speakers. Again, it is best if you turn the car to avoid the use of batteries. <br /> <p><br /> <p>3. Set your transmitter to a radio frequency is not used in the stereo field, and tune the same frequency. Adjust the volume on the stereo halfway. <br /> <p><br /> <p>4. Place your iPod within reach of the driver or passenger. When the iPod is playing, the sound will be transmitted to the radio. You can adjust the volume on the iPod itself to control the music changing. When the iPod is off, the radios go silent, although you will hear a static noise. Turn on the radio to get rid of noise, and to save battery when not running the car's power. <br />

on Aug 09, 2011 | Apple iPod touch

Tip

How to connect your iPod to a Car Stereo


Many car stereos have more new connections that MP3 playerslike the iPod can be connected and played through the stereo. For new carradio, you only need to connect the device and the MP3 player. If you have anold stereo, connect your iPod or connect a 3.5 mm stereo cable or FMtransmitter. Connect iPod directly to the stereo with a stereo cable willresult in better sound quality on the FM transmitter, which can be interruptedor static signal.

AUX
1. Find an AUX port. The AUX is a hole, only small to belocated on your car radio face. (The size is perfect for connecting headphonesor an auxiliary cable.)

2. Connect the 3.5 mm stereo cable into the hole in front ofyour car.

3. Connect the other end into the hole stereo AUX jack /headphone jack on top of your iPod.

4. Connect your iPod.

5. Activate the AUX input. This will be different for eachcar. You may need to field through your input options (e.g., FM, AM, CD, etc.)to access the AUX. Or you may need for your stereo pressing the Menu button.Then, the options for auxiliary input field to the AUX input as possible.

6. Find a song on your iPod and press the Play button whenthe auxiliary input is activated. If you do not hear anything, make sure thevolume on the iPod device and radio. If the iPod is playing your song, you'llsee the song progresses on the iPod screen.

FM Transmitter
1. Find an FM transmitter that is compatible with the iPod.So let your FM transmitter near your car radio.

2. Connect the iPod to the FM transmitter.

3. Tune the radio to your car radio has a frequency thatonly static, then the vote of the same frequency channel using the buttons +and -.

4. Connect your iPod. Then a number and press"Play." Make sure to turn all your volume on your iPod. You should beable to use his music. If not, find a new frequency until you find one thatworks with the iPod and the transmitter.

on Aug 09, 2011 | Apple iPod touch

1 Answer

How do I preset the tuner for radio stations. I've never had a problem doing this with any other stereo. But what I think should work isn't!


Not very specific. Do you have the manual?

The following is from a VSX-03TXH manual. It ain't pretty but it may help.

I'm posting it in multiple parts due to space contraints.

37

Chapter 6:

Using the tuner

Listening to the radio

The following steps show you how to tune in to FM and

AM radio broadcasts using the automatic (search) and

manual (step) tuning functions. If you already know the

frequency of the station you want, see Tuning directly to a

station below. Once you are tuned to a station you can

memorize the frequency for recall later-see Saving

station presets below for more on how to do this.

1 Press the FM/AM button to select the tuner.

2 Use the FM/AM button to change the band (FM or

AM), if necessary.

Each press switches the band between FM and AM.

3 Tune to a station.

There are three ways to do this:

Automatic tuning

To search for stations in the currently selected band,

press and hold TUNE ?©/?? for about a second. The

receiver will start searching for the next station,

stopping when it has found one. Repeat to search for

other stations.

Manual tuning

To change the frequency one step at a time, press

TUNE ?©/??.

High speed tuning

Press and hold TUNE ?©/?? for high speed tuning.

Release the button at the frequency you want.

Improving FM stereo sound

If the TUNED or STEREO indicators don't light when

tuning to an FM station because the signal is weak, press

the MPX button to switch the receiver into mono

reception mode. This should improve the sound quality

and allow you to enjoy the broadcast.

Using Neural THX

This feature uses Neural Surround™, THX® technology to

achieve optimal surround sound from FM radio.

• While listening to FM radio, press AUTO/DIRECT for
Neural THX listening.

Dec 23, 2010 | Pioneer VSX-07TX Receiver

1 Answer

Iwave fm stereo transmitter


This is a device that "Sends" FM stereo & Transmitts Radio waves, and sends sounds/music speech etc, over the airwaves to a suitable reciever an the same "Channel" You can hook up say your Ipod to it and say tune your Car radio to the "Station" it sends on and listen to ya compilations, in the car, thru the car stero system. The radio just "Sees" it as another strong station.

Jan 24, 2010 | Pyle PIFMDK6 iPod Car Stereo FM...

2 Answers

I just got a Jabra Cruiser and need to change the radio frequency to 88.1. Does anyone know how to do that? Thank you!


All that means is to put your radio on FM 88.1, and just wait. Jabra will find the exact frequency (mine is 88.7) and then it will work. When you want to use it to listen to music, just put the radio on 88.1 .

Dec 26, 2009 | 2008 Subaru B9 Tribeca

1 Answer

Connecting an MP3 player to car radio


The most common way is to use the auxiliary input of the deck or head unit. However I don't believe the JVC model you have has one of these. Don't despair though. Head to your local department store with a music department and pick up a universal FM modulator ($20-$30).

These will 'pretend' to be an FM radio station inside your vehicle. Attach the stereo mini plug to your walkman or other audio device (mp3 player etc.) Then tune the FM Radio to the fm station listed on the FM modulator and you will be able to listen to the device through your car stereo speakers. Now this isn't as clean as a direct hookup but for most its an economical way to listen to alternate sources on your Car Stereo.

Jul 07, 2009 | Sony Car Audio & Video

1 Answer

Car sound system high pitch frequency


you need to install a radio suppressor, that will eliminate the noises,

you can buy them on ebay, but google "radio suppressor" and find out why it's happening,

if it's an older car you connect 1 to your coil terminals, but i would go for an inline version first (you coonect to radio power wire).

Hope you listen to clear tunes soon :)

Apr 12, 2009 | Dual Car Audio & Video

1 Answer

My pioneer inno2 don't sent any fm signal to the car stereo


I had to add the sure connect antenna on one vehicle and it solved it. Doesn't make sense since one car would run one receiver and had no sure connect but the one receiver needed it. Anyway-works for me fine now!

Nov 23, 2008 | Pioneer inno2 Portable XM Satellite Radio...

1 Answer

No radio in menu. only music. voice .settings .


The service may not be available in your area. Make sure the headphones are connected to the player when searching for radio stations: Here's pg 15 of the user manual:

FM Radio (if applicable)
The Sansa
®
player includes an integrated FM radio for listening to live broadcast FM
stations. Please note that the FM Radio function may not be available in your region.
Listening to FM Radio
To listen to live broadcast FM station, follow these steps:
1. Select FM Radio from the Main Menu.
2. A radio frequency menu will appear.
3. Press |<< or >>| to adjust and search for the desired frequency, or select
preset by pressing Select.
4. For fast search, press and hold the |<< or >>| buttons.

Feb 20, 2008 | SanDisk Sansa Clip MP3 Player

Not finding what you are looking for?
Pioneer inno2 Portable XM Satellite Radio Receiver with Home Kit - Black Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Morne Olivier

Level 2 Expert

257 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...