I can't find a motherboard manual so I know the pin layout of my Acer Aspire AX3200-U3600A. I switched the motherboard into a new case, but can't figure out the pins to connect the power led, hdd led, reset s/w, and the +p and -p leds
Comment posted on Dec 04, 2008
I know what set of pins, just don't know exactly what connects to what pins.
I was given useless information. Like.... H.D.D LED connects to pins 1-3 and the such. And which pin is number 1....
Pin arrangment is Industry Standard Architecture.....
pwr led pwr sw N/C
X X X X O
X X X X O
hdd rst N/C
translated this is top row left to right ...... power led, power switch no connection
Bottom row is left to right........ hard drive, reset, no connection
Note: not all computer cases have a reset button, also the connectors for power led and hard drive produce a light, if the light does not show, power off the pc swithc the cable rooun 180deg on the connector pins and reconnect.
I need help were do i put the power button wires on my motherboard
1,915 views
Usually answered in minutes!
i have pretty much the same problem i switched to a new case and cant get the two from USB ports or the audio jacks to work because of the bloomin pins
I have a old pentium 166 and i bought a new case for it and I took pictures but i cant seem to see in my picture wher these certain connections go
Hdd led, reset sw, audio, power sw, usb, but whe i look at the mother board i see Speakers is that where i put the audio connector? I know its old but I have a lot of things on it.
Whats' the Serial Number for your board?
×