PE error where E is blinking in whirlpool whitemagic

SOURCE: water is not flowing into the machine

There are a couple of possibilities:

1. Are the hot and cold valves open?
2. If there are filter screens in the lines, are they clogged?
3. If set to warm, does any water flow at all?
4. If there is no water flow, first check the water level switch to see if it is working...this is located on the bottom of the machine...it is generally round and has a tube running to the tub and two or more wires.  It should have closed contacts to let the water valve work.
5. If there is some water flow, the valve is likely bad or the supply is clogged.
6. If the switch is continuous, the problem may be the timer.
7. Is the water temp switch good?...unlikely.

SOURCE: Hi could you please send

Do you happen to have the model number of the machine? thanks again
Rick

SOURCE: I want user mannual of

you can try and go to (appliancerepairplanet.vstore.ca to see if they can get it for you.

SOURCE: we have bought a new

Search 'Google' for 'Descaling Washing Machine' and you will get your answer. Use your discretion.

Gotit

SOURCE: i have whitemagic f55 model

hi i am deepak my whirlpool whitemagic f55 low voltage problem plz help