MY NOKIA 2600C AFTER SWITH ON NO KEY IS WORKING

i forget the password of nokia 2600c v 06.82

Your Nokia Unlock Codes!

Please do read the ENTIRE PAGE prior to attempting to enter your codes
Nokia Unlock Codes Generated For Nokia 2600
These Nokia Unlock Codes are Generated For Nokia 2600 with IMEI: 011667002906793 (DCT 4) Locked to ProviderAT&T(Other DCT4) in U.S.A. and will only work with this phone!

#pw+754440272246356+1#
#pw+354116772233126+2#
#pw+746320766415330+3#
#pw+288055103672167+4#
#pw+396496413416000+5#
#pw+837921656511136+6#
#pw+237225755524034+7#



How to Enter your Unlock Codes
Recommended CODE :#pw+237225755524034 +7#

1. Remove SIM CARD !
2. Type #
3. Then press the * key 3times (you should get a "p")
4. Then press the * key 4times (you should get a "w")
5. Then press the * key 2times (you should get a "+")
6. Then enter: 237225755524034
7. Then press the * key 2times(you should get a "+")
8. Then enter: 7
9. Enter: #

IF UNLOCK SUCCEEDS YOU SHOULD SEE RESTRICTION REMOVED ON SCREEN, YOUR PHONE IS NOW UNLOCKED!
POSSIBLE ERROR MESSAGES:

• If you get CANNOT UNDO RESTRICTION your phone cannot be unlocked remotely and you need to mail in your phone!
• If you get CODE ERROR the above codes do not work for your phone DO NOT ATTEMPT TO ENTER THE SAME CODE AGAIN
  Repeat above instructions, but with the numbers from code 1 (#pw+754440272246356+1#) if code that does not unlock your phone STOP! . You need to Mail-In your Nokia phone to have it unlocked

Sim lock and Network lock are same...You can get the Unlock code from the site
Mobileunlocksolutions.com/nokia-2600c/rs1wp9/ and Unlock Nokia 2600C-2(2600C) from network lock.

I take it u want to restore factory setings and u dnt hav d paswrd..U cn restore d setins witout factory code just
1,remve ur memory card
2,put off ur phone
3,press and hold *(star) and 3 and call(green buton to pick call) oltogether dat is *+3+green botton
4,stil holding down dis bottons put on the fone
5,wait til u c formating b4 u realse ur hand from the keypad...Rememba U Must PRESS D KEYS 2GEDA.ht vote

I was also looking for that, but i couldn't find it. But i got one solution to format Nokia 5800 it doesn't work for security code.
To format or hard reset nokia 5800 press 'green key, red key and camera botton. After pressing these three botton, press the power which is located at the top. When it shake release only the power botton not the green, red and camera botton. It will start up your phone and after sometime it will display country botton and now you can release the keys. Thats it. This is call Hard Reset.

011941 00 205614 3

the most common problem in nokia 2600c and 2630 is keypad { navigator keys not working } while u alredy replaced key pad ic,here is final solution ,just chk tracks as given pic ,if not solve just reball cpu ,100% ,solution for navigator keys{ menu keys}
i have already solve this problems

here is new link for image
http://rapidshare.com/files/143053547/2630keypadwayno9.rar

http://www.unlock-free.com/nokia-master/
Takes care of most nokia phones. It's a free solution.Please follow site instructions.
Please rate the solution.
Cheers

KEYPAD NOT WORKING ONLY POWER. ALL BUTTON ARE NOT WORKING FOR NOKIA 2600C-2.

hello, i have nokia 2600c
i want to connect to my pc.?
my id [email protected]