Problems picture not showing

Your problem is in the TV. I'm not familiar with your TV, but you should look for an option to turn it to normal or to try and scan for channels with xbox plugged in and running. I'm pretty sure that if you get HDMI cable, your problem should be solved.

Oky this is wat you soud do turn it of so that the red ligth is on nou keep your finger on the red ligth untill it turns red again do the same but thins time you will hear a pieping sound and a nother one but the nother one is gone make 2 sound direkly after chother nou thake your finger of after the second pieping noise a screen will apear then pick the one that says restore sesteme do it untill is works (it works mostly after the second time) but if nothing works sorry your hard drive is f up you soud get a new one.SORRY FOR MY SPELLING I AM ONLY 14 AND AFRIKAANS but any way I hope i was usefull pzzz rate me.THIS IS THE BEST SOLUTION.if there is any more problems with your ps1,2,3,xbox,psp,dvd player or pc plzzz email me to [email protected] .

Lots of reports of problems like this have been reported among xbox consumers. The xbox is actually kinda unreliable (look at the price drop lol). If you still have warranty take it back. It's probably fried and never will work again.

Does it get the three red lights around the power button if so go to the xbox website and they will repair it for free

make sure the switch at the back of xbox is on tv or hd, whatever you use.

You have a problem with your hardware. This happens to about 30% of xbox's over time. It is called the red ring of death. You need to reflow the solder under the GPU chip to fix it, find an xbox repair place on ebay.com

It is the same thing as the 3 red light error. It is the solder under the GPU chip.
We can fix this for you if you interested email us
[email protected]

The GPU chip has a bad contact underneath. We can fix this for you.
www.videogamerepairservice.com

REPLACE THE FAN THAN SHOULD BE FINE BUT IF THE FAN WORKS AND SHOWING THE RED RING OF DEATH YOU XBOX IS F******

This has happened to me before and its a solder issue, same as Red Ring of Death issue. Try to leave the 360 on for an hour and then let cool for 5min. If this doesn't work you can try the towel method, but if that still doesn't work, the best bet is to send to Microsoft. If you do take the 360 apart, try tightening or loosening the black screws on the bottom frame, located under the x-clamps, it may take some fine tuning. You may also find that completely removing the black screws will do the trick.