Model 207678 date code c3602

Hello, Chris -

The instruction manual for the Dewalt DWS773-GB saw states the following on page 8:
(Quote)
DATE CODE POSITION (FIG. 2)
The Date Code (v v), which also includes the year of manufacture, is
printed into the housing.
Example: 2012 XX XX
Year of Manufacture
(End quote)
http://www.free-instruction-manuals.com/pdf/pa_1403886.pdf

Look at Figure 2 (on page 1) in the instruction manual.. The date code is identified on the figure as 0000 00-00, area v v.

Best wishes.

https://www.electrical-forensics.com/MajorAppliances/WhirlpoolDateCodes.html


Whirlpool Date Codes

Can't be sure from tables.


http://www.appliance411.com/service/date-code.php

How old is my appliance?

Brand: Whirlpool
Type: Range/Stove/Oven
Country: USA
Model: WFE540HOES1
Serial: R72817290 This product could have been manufactured on multiple dates. Personal assistance may be needed to date the product more accurately. According to the serial number this product may have been manufactured in Ramos Arizpe, Mexico, July of 1977 or1987 or 2017. Tip: Based on the model number supplied, this product design may have been introduced to the marketplace for 1978 in which case the closest date suggested above to 1978 is likely the manufacturing date for this product.

this is copied from a site, the web address is pasted below.

The serial number depending on the model of rifle, will be located either on the upper or lower stock tang, or side of the receiver.
http://www.gunvaluesboard.com/marlin-serial-numbers-dates-of-manufacture-1664.html

also if you find serial # you may find more info here.
http://oldguns.net/sn_php/marlinlookup.php

From 1962 thru 1968 Marlins rimfire rifles (other than the 39 series lever actions) used a two letter date code that was stamped on the barrel. This date code is different than the one already listed, as Marlin rimfire rifles (other than the model 39 series) did not have a serial numbers until required to by Law after 1968. The first letter of the date code represented the month of manufacture while the second letter indicated the year. This date code was usually stamped on the left side of the barrel just in front of the receiver.

Look at the date code on the left rear part of the barrel. Google 'Remington Date code' to intepret.

Look at the left rear portion of the barrel for the date code. Google Remington Date code to interpret.

There are no records by serial. The date code is on the left rear portion of the barrel. Google 'Remington date codes' to find out.

Http://www.nostalgiaelectrics.com/manuals/ofp501.pdf

I think this is the manual for that machine.

ALL VISION BATTERY MODELS
Date code stamped on top of battery container

X1 X2 X3 X4

Where X1 denotes year of manufacture A = 2001 B = 2002 etc.

X2 denotes month of manufacture A = January B = February etc.

X3 X4 denotes date of month of manufacture

Eg AH27 = battery manufacturing date 27th August, 2001.

http://www.nostalgiaelectrics.com/manuals/ofp501.pdf