Low memory on hp 3015

Sounds like a bad formatter. I would try a firmware upgrade first and if unsuccessful, would replace the formatter. These formatters are infamous for failure.

You clean the memory by deleting all the print jobs awaiting for printing.

Delete all stored messages from the memory, try it ...

uninstall the driver of the printer and reinstall it again..................your problems will be solved.............




thanks

The printer needs more memory.
The PDF is probably to complex to print with the amount of memory installed on the formatter.
Google the printer and look for memory.

This is a problem with the memory in the remanufactured toner cartridge you are using. See http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1299372807615+28353475&threadId=1131820

Are you referring to the fax memory?

Press the Enter/Menu button then select options by pressing < or > button. Look for Fax Functions. Press ENTER. Again press the < or > button until you find Clear Memory. Press the Enter button again to clear the memory.

HP.com has a web page that addresses your problem:

Low Memory Error

Also, for some reason, you've posted a problem for an HP Laserjet 3015 in the Officejet 6110 forum. That makes it kind of confusing for those of us trying to help resolve issues on specific products. If you can in the future, please select the correct forum for your product's problem.

Thanks.

Have you tried clearing previously saved faxes. Worked for me.
http://forums12.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447627+1219076722640+28353475&threadId=1091904

Hello All,

Please perform the following:
Super NVRAM init
When a super NVRAM init is performed, the all-in-one language and telecom country/region settings
are undefined. The user is prompted to set the language and telecom country/region. Until these settings
are defined, the all-in-one will not return to the Ready state.
CAUTION A Super NVRAM init erases all data that is stored in both the unprotected and
protected NVRAM memory.
To perform a super NVRAM init
1. Turn off the all-in-one.
2. Press and hold down the * and 5 buttons.
3. Continue to hold down the buttons while you turn on the all-in-one. Hold the buttons throughout
the entire power-on sequence.
4. When Permanent Storage Init. appears on the control-panel display, release the buttons.
5. When prompted, set the language and telecom country/region.
6. Allow the all-in-one to return to Ready before using it.