Question about Razor MX650 Electric DirtBike

1 Answer

Razor MX650 clutch on rea axle won't drive

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

It is the rear freewheel assembly causing the problem. if is fixable, but you have to be good with tools, the bicycle shop and the electric bike shop both said they couldn't fix it, but is is doable. 1. you need a special bmx tool that fits that back wheel, your local bike shop should have it in stock. 2. you need to remove the freewheel sprocket and disgard it along with the the bearings (make sure to unscrew the razor chain sprocket from the freewheel assembly and secure it for reuse). 3. either purchase a new freewheel sprocket for bmx wheel or remove one from a old bike (again you will a special tool for that). 4. screw the razor chair sprocket onto the new BMX sprocket (it goes on with the same 4 original screws, right over the sprockets. 5. Screw the freewheel back onto the rim now. tada its fixed.

Razor MX650 - cafd95b4-947b-497c-ab36-ab44a653dbde.jpg





Posted on Nov 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace mx650 Freewheel Clutch


You can buy a tool online that grabs the free to turn it off if the wheel center hub. Looks like a socket with 4 teeth.

Jun 20, 2014 | Razor MX650 Electric DirtBike

1 Answer

Rear wheels won't move chain just spins


I posted a solution to this previously, please check it out.

Aug 27, 2012 | Razor MX650 Electric DirtBike

1 Answer

Car runs but won't go into gear


Clutch has gone or clutch cable broke

Sep 16, 2017 | 1997 Buick Century

1 Answer

Hyundai Elantra clutch Pedal Stuck Up


The axle job should not have caused any problem to develop in the clutch.
I don't see how they could have.
If you can work the slave by hand, it may be a problem with the clutch master cylinder. Maybe the rod from clutch pedal into the master is bent or binding up and won't travel into the master. You could check if master operates easily by taking line off at the slave cylinder (or if not able to remove hose, then open the bleeder valve on slave) and see if your pedal operates now. Use a can to catch fluid if you don't want it to spill on floor. If the pedal still won't move it must be a problem with the master cylinder or the clutch rod.
If the pedal works with line removed, or the bleed valve open, then the release bearing inside the bellhousing must be binding up and not moving forward to engage clutch. (The slave cylinder pushes the clutch fork lever which pushes the release bearing forward on a shaft up against the clutch pressure plate to allow the clutch to operate .If the release bearing is the problem, the transaxle will have to be removed to fix it.
As I said, though, if you can operate the slave and the cllutch lever it pushes with your hand, it doesn't sound like it is binding down there. Check the pedal's push rod going into the master cylinder. Good luck.

Jun 01, 2012 | 2001 Hyundai Elantra

1 Answer

I have a craftsman lt 1000 riding lawn mower and it runs, but it won't go into gear it goes into gear, but clutch won' engage the gear.


Look under the mower to see if the drive belt has come off or broke. It is the belt that runs from the bottom of the engine to the rear axle.

Oct 01, 2011 | Craftsman 17.5 hp 42 in. Deck Lawn Tractor...

1 Answer

How do i adjust the chain on the mx650


The chain tensioner is on the right side of the bike a few inches or so in front of the tire on the rear swing arm all you do is adjust it up to tighten and down to loosen it.

May 30, 2011 | Razor MX650 Electric DirtBike

Not finding what you are looking for?
Razor MX650 Electric DirtBike Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Razor Toys Experts

Bryan Mcphee
Bryan Mcphee

Level 1 Expert

36 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

William Erickson

Level 2 Expert

47 Answers

Are you a Razor Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...