I need a manual for Klh asw10-100c subwoofer

I just found your question answering another.

Windsor-10-12-Subwoofer-Manual.pdf

KLH Audio https://klhaudio.com > uploads > 2020/12 > Wi... PDF You can experiment with different configurations, or even add multiple subwoofers to your system (see diagram). 1. 3. 2. CONNECTING YOUR. SUBWOOFER. Ensure that ...
4 pages

..

I would check the caps on the power supply. They are rather large electrolytic capacitors that will look like they burst and/or leaking. When these die, the caps ground and the sub will make a loud buzzing sound. If you are handy with a soldering iron you can replace them yourself. Replace them with the same voltage or a little bigger and same with the size.

If the cap. says 16v 4700pF on it, for example, a 20v 5300pF or a 16v 6200mF cap. will work for this application.

Yes.

It's frustrating that KLH manuals seem impossible to find anywhere online BUT a simple picture will suffice...

Go here and supersize the picture of the rear of the sub...

http://cgi.ebay.com/KLH-Audio-Systems-Bassbite-V-Model-E214708-Speaker-/110673631693

Run your front channel speaker wires to the CLEARLY-MARKED connectors on the sub and daisy-chain your front speakers to the CLEARLY-MARKED connectors on the sub.

Adjust the sub volume to match the front speakers levels. This will give you local volume control at the Sony.

Some specific model numbers might lead us to specific manuals and specific instructions.

Depends on your source and its amplifer complement. Some can drive a subwoofer directly while others just produce a Line Level subwoofer output for use by a separate amp feeding a subwoofer or self-amplified sub.

The set-up of the source to produce a subwoofer output is totally dependent on its design. Generally, you have to 1) tell it you have a sub, 2) define how bass will be routed or shared among your various speakers accordingto their bass-handling capacities, 3) using test tones, set the relative ludness and crossover settings so you have a uniform sound field.

To find a manual, maybe run it by the manufacturer

Fundamentally the same sub - use these instructions as a guide.

http://www.parts-express.com/pdf/300-635m.pdf

Try the KLH site. I have downloaded (for free) info on KLH products. Not much on technical stuff, but set up info and connections.

Did you ever find a solution for this problem? I have the exact same thing happening with my KLH subwoofer and I'd love to know how to fix it!

Is sub out turned on on the reciever? Some have a setting that doesnt use the sub out, like 2 channel.

I wrote to KLH and they sent me the schematics for the upper and lower boards. I asked if I could share them, and they gave me permission to post them for use here.

Have fun!


KLH ASW 10-120 subwoofer schematic - lower board

KLH ASW 10-120 subwoofer schematic - upper board