At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited into written English with punctuation.
The lens isn't black, the viewfinder is black. Connect it to a television or computer and see if playback and live recording is working. In that way you know the optics and the electronics are working. The viewfinder is a small LCD display screen with a magnifying glass in front of it. Take it to your local camera shop, they will know someone that still repairs these camcorders.
I was hoping to find a free PDF manual as I wondered if there is a switch or a setting to turn OFF the viewfinder?
i think you are able too see the video in play back mode. so there is no problem in your LCD. i think the CCD has got damaged in your CAM. that is why you are not able to view anything in shooting mode. because CCD is the layer which converts the light falling on it to a electrical signal and shows us as a complete image.
iFixitMay 4, 2015 - When I look through the viewfinder or at the lcd it is blank / black. Also when I take a picture and view it on my computer, the picture is blank ...
Dec 8, 2015 - There is no picture or a black screen appears in the viewfinder or LCDwhen attempting to ... Look to see if an image can be seen in the viewfinder or LCD. IMPORTANT: Some camcorders have both a viewfinder and LCD.
There is two ways to view your "taking picture" with the LCD and with the viewfinder, you can shut the LCD off to save battery power and use the viewfinder and that is what I think has happened. a touch of the DISP button and it will switch from the LCD to the viewfinder. here is a diagram
Diagram
With you saying the LCD is working for functions but not for taking pictures this is what I suspect is the problem.
Hey jimicricket,
The mirror is what reflects what the lens is seeing up to the viewfinder, and if it is sticking in the up position that is why you can't see anything sometimes thru the viewfinder. I would have the camera looked at by an authorized service technician, and it's possible that it just needs a good cleaning.
Hello grnca,
CCD Imager ( an electronic part) at the end of Lens Assy got defective thats why you can't see any result in camera mode.
Please contact nearset Sony repair shop for replacement of CCD Imager IC.
Knowledge Article
C116445
There is no picture or a black screen appears in the viewfinder or LCD when attempting to record.
Follow
this procedure to troubleshoot if there is no picture or a black screen
appears in the viewfinder or LCD when attempting to record.
NOTES:
Because
each of these steps represents a possible solution to this issue, check
the viewfinder or LCD status after completing each step.
It
may be necessary to refer to the operating instructions provided with
the camcorder for information on how to perform a task on your specific
model.
Ensure the lens cap on the front of the camcorder has been removed.
Ensure a fully-charged battery is inserted in the camcorder.
Ensure the STANDBY/LOCK switch is set to the STANDBY position.
Turn on the camcorder and set it to the CAMERA mode.
Look to see if an image can be seen in the viewfinder or LCD.
IMPORTANT:
Some camcorders have both a viewfinder and LCD. To conserve power, the
viewfinder and LCD will not display at the same time. To use the
viewfinder, the LCD must be closed.
If the issue is not resolved, reset the camcorder to factory specifications.
NOTE: If the issue is still unresolved after completing the troubleshootin
i cant see anything through the viewfinder
×