Exercise & Fitness Logo

Related Topics:

Posted on Jun 01, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hi I have a lifefitness life stride 9500 and when I turn it on it says notify maintenance any ideas?

1 Answer

ernesto cuadra

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Life Fitness Master 12,223 Answers
  • Posted on Jun 02, 2012
ernesto cuadra
Life Fitness Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Sep 03, 2011
Answers
12223
Questions
0
Helped
4081087
Points
34431

The best way is read you instruction manual, for instruction about this notification.
2) You must Lube the deck belt, by lack of maintenance you can have this notification.
3) Lube the rollers bearing.
4) Download the instruction manual if you do not have www. fitness.manualsonline.com or www. iconservice.com
5) Run the software calibration for diagnose and troubleshooting.
God bless you

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to adjust unit measurement

How do I change from mph to kph on a 9500 hr lifefitness treadmill please
tip

95Xi Crosstrainer Crank Arm Cover Replacement

About This Video


Crank Arm Cover Removal and Replacement Video for the 95Xi LifeFitness Crosstrainer


  • This video demonstrates how to remove and replace a Crank Arm Cover on a Life Fitness 95Xi Crosstrainer elliptical


Necessary Tools:


  • Philips Screwdriver


  • 5/32" Allen Wrench


  • 2MM Allen Wrench


  • T25 Driver


  • T50 Driver




  1. Remove the main shrouds as seen in the shroud replacement video


  2. Remove the outer link cover as seen in the outer link cover removal video


  3. Remove the pedal lever assembly (as seen in Sportsmith's Pedal Lever Replacement video) on the side where the crank arm cover replacement is needed


  4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover


  5. Replace the parts in reverse order




LifeFitness 95Xi Crank Arm Cover Video Removal and Replacement
tip

95Xi Crosstrainer Shroud Replacement

Video Presentation of Replacing the Main Shroud on a LifeFitness 95Xi Crosstrainer


  • The video shows the steps involved in replacement of the main shroud on a LifeFitness 95Xi


  • Tools:



    • Phillips Screwdriver




  • Remove the (4) screws securing the main shroud to the drive frame assembly



    • There are two screws on each side




  • Lift straight up on the shroud to remove it


  • Install the main shroud in reverse order



    • Making sure the main shroud fits into the grooves of the lower shroud panels




Repair Video for LifeFitness 95Xi Crosstrainer Shroud Replacement
0helpful
1answer

Chain keeps comming off

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

It sounds like you are dealing with a stretched chain. If the chain will not tension any further, you may be looking at the need to purchase a new chain. Use your model and serial number at the following link to order a new chain.

Bike Parts for LifeFitness LifeCycle 9500 Upright Belts Pedals Seats...
0helpful
1answer

Eliptical 9500 HR lifefitness lights then stos

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Start by checking your battery for the proper voltage output. The following are some helpful videos.


tip

95Xi Crosstrainer Drive Belt Replacement

Drive Belt Replacement Video for LifeFitness 95Xi Crosstrainer Elliptical

Tools needed:


  • Philips Screwdriver


  • T25 Driver


  • T50 Driver


  • 2MM Allen Wrench


  • 5/32" Allen Wrench




  1. Remove the main shrouds as seen in the main shroud removal video


  2. Remove the left outer link cover as seen in the Outer Link Cover removal video


  3. Remove the left pedal lever assembly as seen in Sportsmith's Pedal Lever replacement video


  4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover


  5. Walk the drive belt off the pulley and remove it from the unit


  6. Install the new belt around the crossover shaft first and then walk it onto the pulley


  7. Replace the remaining parts in reverse order


LifeFitness 95Xi Drive Belt Video How To Replace
0helpful
1answer

We have Lifefitness 9500HR Treadmill. I am getting a Bad Controller Error. We have two 9500HR models. I swapped out Controller, with working 9500HR and still get Error. Keeps going into Notify Maintenance....

I would suggest swapping the consoles to see if the problem follows. If this does not help you figure it out, you are more than likely looking at a wiring issue.
0helpful
1answer

Life fitness crosstrainer 9500 HR just shut down few second after start

see the video and fix it. This happen because the lack of maintenance schedule.God bless you
0helpful
1answer

Life fitness 9500 is shocking users? help?

Hi, there is a service bulletin for this problem.
1) perform a continuity test on the power cord between the earth pin at the plug and any exposed metalwork of the treadmill (say an exposed bolt). If you get a reading of less than 1ω - that is good. If higher than this, try another part of the treadmill or trace the cause.
2) Ensure the Power outlet has a good ground - Your electrician could verify this for you.
The most common problems are static buildup on the Striding belt caused by users wearing polyester and scuffing their feet as they are running. This causes static buildup which gets discharged through the user when they come into contact with the treadmill frame.
Happy hunting
0helpful
1answer

Treadmill has automatic shut off sensor when i walk on it for a time

Sounds like the sensor that detects someone is on it is bad, Here is the service manual that should help.
LifeFitness 9500 Series Service Manual
Not finding what you are looking for?

223 views

Ask a Question

Usually answered in minutes!

Top Life Fitness Exercise & Fitness Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...