TV button will not light up when pressed with the uverse remote

If you are getting Press OK to watch TV and it's not responding to your function, the best way to resolve it is by Pressing the ATT button on the upper left hand corner of your Uverse Remote control and then Press the OK button..

I hope this helps you and please don't forget to rate me.
thank you. :)

If you want, you can do it auto program. Press the tv and enter button at same time one the lights stop flashing press the fast forward button untill the tv turns on or off whichever the opposite currently is. Once the tv turns on or off press thr enter button. If thr tv is now on try to work the volume. If the tv is off, try tufnung the tv in with the remotd. If the tv does neither yiu passed the code and need to repeat the process. I count the times I press the ff button so if I pass the code I can go fasger until I get to around where the tv turned on or off last time. his process works for most ddvices, some tvs may require pressing the ff button several hundred times to find the correct code.

It's called a pillar box and it's normal when watching standard definition content on a high definition television. You can adjust this setting by pressing the format or pic size button on your original television remote or by pressing the zoom (bottom right corner) on your Uverse remote.

Hello, Mr. Ross.

I'll be more than happy to assist you with this and all of your other Uverse concerns.

First please write these codes down, these are the TV codes for your Mitsubishi TV,
0093, 0150, 0178, 0019 (we are going to do trial and error for these codes till we hit the correct one for your TV.)

Please turn the TV on and point your ATT remote control.
Okay, using your ATT remote control, please press and hold the TV button together with the "OK" button.
All four modes should flash twice indicating that we are programming your remote control.
Now, enter the 4 digit code and the selected mode (in our case it is the TV) should give a long flash.
Then press OK.
Try to turn your TV off and check if it would respond
If not, please redo the steps but this time use the other codes I provided earlier.

If these codes wont work we will do the automatic code finder if you are using the "black" AT&T Uverse remote control.

Using your ATT remote control, please press and hold the TV button together with the "OK" button.
Then press the "scan/ff" button repeatedly with atleast 1 second interval till it turns your TV off.
Press OK then try to turn your TV on again.

Whenever your remote won't respond, try pressing either the AT&T button on top of the remote before any other buttons or the TV button beside the ATT button.

i currently use uverse and none of there remotes work for dynex tv's i suggest buying the logitec harmony 520 or 420 or above remote from amazon read the reviews there around 40 dollars and lets you control everything and they connect to you pc you just plug in you model number and the remote learns all the commands as well as lets you set up activities that will allow you to control multiple devices without having to switch between hitting the tv button, home theater button, uverse box etc.
hope this helps.

Make sure that you have turned on the tv before you begin programing your Uverse remote control.

Hold down the TV button on the Uverse remote. (If you are trying to program a different device, hold down the button that names that device). As you are holding the TV button, press and release the OK button. You know you have done this right when all the mode keys flash twice.

Find the 4 digit code for your device

At this point, the TV mode button should flash three times. Try to turn the TV off by pushing the power button. If it does not turn off, try a different code. The manufacturer of your TV has many codes.

If none of the codes for your device work, try manually searching for a code. Go back and repeat steps 1 and 2. Then enter 922. Hold play as the remote cycles through various codes. When your TV turns off, push enter.

---------------------------------------------- ---------------------------------------------- Sharp TV codes for at&t remote: 1004, 1009, 1011, 1025, 1064, 1077, 1078, 1081, 1097, 1099, 1153, 1157, 1274, 1298, 1311, 1312, 1362, 1375, 1378

i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.

NOTE: some tvs WILL NOT program to our remotes

have you tried the auto code? press tv ok together... 4 top lights will flash twice...enter 922.. tv light will flash twice... press and hold PLAY button until tv shuts off.... that should do it...(80% of the times it works... if not.. there will be no code available...
GOOD LUCK !

1382, 3213, 1383, 3202


try one of those

1343 or 1005 are the codes - press the TV mode button and the OK button together - the release at the same time - the top row of mode buttons needs to blink twice - then enter the code - the TV button should blink 2 times - try the power and volume buttons - if it worked then be sure to press the ATT mode button again after so you can change the channels