Night sentry-solid state timer model ej341-70

https://cdn.masterlock.com/sentrysafe/resources/pdf/manuals/Sentry-SLS-Old-Models-Instructions.pdf
That is what downloads when you enter 1330 as the model number. If you Google sentry 1330 instructions, the google results pop up some questions and answers that may be of interest with you click the carrats beside the questions.

Instructions on link below
http://waterheatertimer.org/How-to-wire-Dayton-Off-Delay-Timer.html

Maximum Load wattage on Dayton is 1 amp.
So timer will work with 10 watt load.

Push button is 120Volt.

I think you have the EJ351
Intermatic does not show EJ341
http://www.intermatic.com/products/timers/consumer%20indoor%20timers/in-wall%20timers/ej351c.aspx

Here's the EJ351 manual:
http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/ej351c%20-%20english.ashx

If this information is not correct, answer back and I will help further

http://www.calibex.com/intermatic-timer-ej351/zzcalibex2zB1z0--search-html


http://www.aplussupply.com/intermatic/timer.htm


http://www.intermatic.com/products/timers/consumer%20indoor%20timers/in-wall%20timers.aspx

rapid Programming.
1. Move control lever to OFFCLEAR for at least 5 seconds
• red indicator light goes off
• all time settings are
erased.
2. Move control lever to ON.
• red indicator light will start
flashing.
3. Check a clock; then turn pushbutton time dial clockwise at least one click.
• stop at the half hour nearest to present time (note
AM or PM).
Note: When turning pushbutton time dial, do NOT
accidentally PRESS at the same time.
4. Press pushbutton time dial once to enter present time.
• red indicator light goes off (present time has been
recorded).
5. Turn pushbutton time dial clockwise to desired
ON time.
• red indicator light blinks with each click.
6. Press pushbutton to enter ON time.
• controlled light(s) will turn on.
7. Turn pushbutton time dial clockwise to desired
OFF time.
• red indicator light blinks with each click.
8. Press pushbutton time dial to enter OFF time.
• controlled light(s) turn off.
9. Repeat 5-8 for other on/off times.
10.Turn pushbutton time dial for at least 2 more turns
from the first ON time to complete this program
• red indicator light will turn on and stay on (steady
light means timer is in automatic).
Note: Pushbutton time dial does not turn
automatically after setting to indicate time of day

It may have these instructions in the owners manual or in a packet found behind the kick panel on the front.

I have a similar sounding timer. It has the same dial and an AM/PM window on it and is made by Dynascan. I found this post on Fixya: http://www.fixya.com/support/t2314418-instructions_program_intermatic_ej351c and then went to the intermatic site and got these instructions: http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/ej351c%20-%20english.ashx I used the RAPID programming instructions and they seemed to work great (at least the red light acted like it was supposed to.) Guess I'll find out tonight :)

Yes, I've got the exact smae problem as Buckfever. no eyes, no nothing, just dozens of solid black images.