I need to program the remote from my TivoHD to operate power and volume on my Samsung LN52A850

505, 506, 516, 523, 526, 566,

573, 612, 627, 647, 652, 653,

654, 655, 656, 658, 659, 664,

665, 667, 669, 670, 679, 680,
704, 717, 730, 738

Try each of the above codes in turn until you find the one which works best, i.e. controls most functions. This may be limited to contolling the power, volume and channel functions. I have also pasted the programming instructions for your remote below, in case you need them.

Regards,
BElectric.


Program your remote control to operate your TV

NOTE: Before you start, locate the remote codes for the TV and write them down.
Follow these steps to program your remote control to work with your TV:

1. Press and hold the TV button on the remote until the SAT, VCR and AUX buttons light up.
2. Let go of the TV button. It should start to flash.
3. While the TV button is flashing, enter one of the 3-digit codes for the TV that you wrote down earlier.
4. After entering the 3-digit code, press the # button on the remote. If the code was entered successfully, the TV light will flash 3 times.
5. Try to control the TV's volume and power.
6. If the remote did not control the TV, simply repeat steps 1 to 5 with another code from the list.

1. Make sure the TV is on.
2. Press and hold the TV button on the remote until the SAT, TV and VCR buttons light up.
3. Let go of the TV button. The TV button should start to flash.
4. Press the Power button on the remote control. The TV button will stay lit.
5. Press the up arrow on the remote every second until the TV turns off.
6. When the TV turns off, press the # button on the remote to lock the code. If the scan was successful, the TV light will flash 3 times.