Apex Digital GB4308 43" Rear Projection EDTV-Ready Television Logo
peter gnizak Posted on Jan 05, 2007

Apex Digital GB4308 remote

Does anyone know how to program the remote(Apex 8201801990L) for this tv? i have an apex dvd player and want to program the remote to it

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on May 01, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: May 01, 2007
Answers
1
Questions
0
Helped
969
Points
1

Programming the Remote Control Remote-control switchover Press VCR/DVD, SAT/CABLE or AUX to select the device you want to control. To program the remote control Press and hold VCR.DVD, SAT/CABLE or AUX for over 2 seconds until the LED on the remote control turns off. Release the button the LED will light again (the remote control enters the PROGRAMMING mode). Enter three-digit code number for your equipment. If the correct code number is entered, the LED blinks three times. If you enter a code not listed below, or you press any other buttons than SEARCH and 100+, the LED turns off. To search codes Press ad hold VCR/DVD,SAT/CABLE or AUX for over 2 seconds unil the LED turns off. Release the button (the LED wil light again) and the remote control enters the PROGRAMMING mode. Press SEARCH. Press CH+/- to search codes downwards or upwards. Each time you press CH+/-, the code number decreases or increases by 1 while the remote control sends the code number for POWER button on your device. If the desired code number is found,press 100+ to program the code for your device until the LED blinks three times.Then the remote control exits from the PROGRAMMING mode and returns to norml operation. Or press any other button to exit from the PROGRAMMING mode after the LED blinks rapidly eight times, and the operation is not active. To check the current code number Press and hold VCR/DVD, SAT/CABLE or AUX for over 2 seconds until the LED turns off. Release the button (the LED will light again) and the remote control enters the PROGRAMMING mode. Press 100+ . You may read the code numder according to the LED display status as follows. * If there is no operation within 20 seconds during the steps mentioned above, the remote control will automatically exit from the appropriate operation. Code Number First - digit 0 1 0 1 Second - digit 0 0 4 5 Third - digit 0 6 3 0 First - digit Blinks rapidly once Blinks once Blinks rapidly once Bliks once Secod - digit Blinks rapidly once Blinks rapidly once Blinks four times Bliks five times Third - digit Blinks rapidly once Blinks six times Blinks three times Bliks rapidly once

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need cods for an Apex DVD player

The programming codes for an Apex DVD player will vary depending on the specific model of the player and the type of remote you are using. Some codes that are commonly used for Apex DVD players are:
  1. 599
  2. 661
  3. 677
  4. 678
  5. 679
You will need to check your remote control's instruction manual for the specific codes that work for your remote and the Apex DVD player you have.
To program your remote control to work with your Apex DVD player, you will need to follow these steps:
  1. Turn on the Apex DVD player
  2. Press and hold the "Code Search" button on your remote control until the indicator light stays on.
  3. Press the "DVD" button on the remote control.
  4. Enter the code from the list above that corresponds to your Apex DVD player. The indicator light will blink if the code is accepted.
  5. Test the remote control by pressing the "Power" button. If the player turns off, the programming is complete.
0helpful
1answer

I have an Apex converter box an a g.e. universal remote control.Whats the code for I can be able to use my remote with this converter box


Apex Digital TV Converter Box DT250 code ' ManualsOnline ...

tv.manualsonline.com > ... > TV Converter Box Support
Nov 15, 2008 - 3 DT250 code is 0847. Was this answer helpful? Yes No. xpertwa posted an answer 10 years, 4 months ...

Digital Converter Box Remote Codes ' Codes For Universal ...

codesforuniversalremotes.com > digital-converter-box-r...
Universal 4 digit remote codes to try for your Digital Converter Box: 1903 1563 0581 5096 ... APEX Digital Converter Code = 0519. ARTEC Digital Converter ...

Remote Control Codes For APEX TVs ' Codes For Universal ...

codesforuniversalremotes.com > remote-control-codes-f...
APEX TV 4 Digit Remote Codes (Best for Universal Remotes & U-Verse ATT) 1434. 1400. 2521. 1085. 1111. 0214. 0216. 0215. 1236. 1241. APEX TV 5 Digit Remote Codes (Best for most SAT and CABLE remotes) 11531. 10879. 10748. 10767. 11991. 10890. 10889. 10156. 10765. APEX DVD Player Remote Codes. 2001. 2056. 2057. 2061. 2095. ...


BUT BETTER to buy a new remote made for it.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk02yqchXMQdJ7M9MZ8pX9PU5BjBoUA%3A1612477075323&ei=k3IcYLKOE8uusAWaoI-QCw&q=apex+converter+box+replacement+remote

..
0helpful
1answer

How do I program my Direct TV remote so my Apex ad-1200 dvd player works

How do I connect JVC DVD Video recorder RM-SDR107U remote to Sony TV?
0helpful
1answer

How to program the TV remote to work with an APEX DVD player? I do not have the APEX DVD code.

As far as I can remember, the original JVC remote doesn't support a DVD player. It doesn't have the necessary buttons to control the player functions. You'll need to stick with the original Apex remote if you have it, or look for a universal remote that is compatible.
0helpful
1answer

How can i program my dvd player to my dishnetwork remote?? It is a apex digital 1110w dvd player

We would be happy to help you with that. Press and hold thedesired mode button until all mode button back lights come on, then release.Then enter the numbers 1757 for your Apex DVD player, and then press the # key.The mode button should blink 3 times. The remote should now work with the DVDplayer. Please remember to put the remote back into satellite mode.


Phillip Chang
DISH Network Customer Support Representative
0helpful
1answer
0helpful
2answers

Codes

Here are the codes to your DVD player. 0240,0640,0740,0840,0044,0644,0245,0545,0146,0347,0547,0495,0992,0741,0596,

P.S. Stop buying Apex.
0helpful
1answer

Apex Digital GB4308

check for cold solder joints @ convergence board, mainly right underneath ic's
Not finding what you are looking for?

979 views

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...