Whirlpool Super Capacity 465 Gas-pilot light won't stay lit

stoves with an electrode start igniter do not lite up pilot by adding a flame, that will not work. u need to find out why and where is the power to igniter is not coming from? the spark module or a bad igniter?

Rebecca Yount, we're sorry to learn that your Oven will not ignite. We recommend service due to we aren't certified Technicians and wouldn't be able to advise you on how to relight the pilot light on your Oven.

Super Capacity 465 oven fix with service manual link

I hope this helps.

You may have several things going on f1 e4 is a control board issue with the touch panel plug in into the control board disconnect and reconnect if this problem presist will need a control board and touch pad for the oven not staying lit there is a new oven igniter kit 8190618 unfortunately no good diagnostics for this problem good luck

Call a gas engineer at once. Gas is extremely dangerous.

That sound to me like yall have some carbon buildup on the igniter. On this stove the igniter does 2 jobs. It lights the burner and verifies back to the control that Houston we has ignition. If junk is built up on that ignitor then she won't be sending verification of ignition back to the control. That white residue needs to be removed. NOTE: I don't have your model number I am going by what you describe that this stove is a Direct spark ignition model. If you have a normal ignitor it probably is weak and not drawing 3.5 amps to open the valve. Post a model number (bottom drawer frame)
More Here

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

the ignitor is weak and needs to be replaced, whats happening is it indeed is coming on yet its not drawing enough amprage(3.3 to 3.6 amps) to open the gas valve

whirlpool super capacity 465 accubake system gas stove with auto starter - oven worked fine the previous night the next day will not do any thing any help out there?

Some gas ranges may take 10 or so minutes to light.
Other than that you may have a defective glow bar ignitor.
If it glows and does not light the reistance in the ignitior has failed.

I would check the power to the oven and then the wiring from the receptacle to the back of the oven. You will probably find the cause of your problem here.