C.31 The casset door doesnt close

Here's a Youtube video. You can decide yourself.

Hi, its sound like if you have a mechanism problem it could be the alignment of the mechanism or a sensor ,because as i can see it doesn t detect the tape when you slide in the cass housing..its could be the cassete in switch locate on the door .you may need a tech to fix this.
hope that will help..
regards Alan..

is casset in right way??

Partially open sounds like a mechanical problem with the cassette housing/door assembly. The door usually stays fully open or will not open at all, caused by component failure on the mechanical driver board. Check to make sure nothing is stuck in the mechanism, like a label or a broken piece from a cassette. If the door will move, but will not latch closed, the problem is most likely on th emechanical driver board.

Per the manual
C means you can fix E means professional service needed.
21 is moisture condensation. icon of rain drop in a box will flash on screen unless moisture in lens Eject tape let sit 1 hour or more to acclimate
31...manual says to eject cassete and reinsert, operate OR daisconnectpower cord andremove battery, reconnect, operate.

Unit may have jumped mechanism timing. Take in for service

uploading problem, when i load my cassete it;s not loading. if i close the cartrige with out cassete it closes but with cassete it won;t close, i already give my camera to jvc service centre the jvc service technician put new cartrige, but i think it;s not alligned properly. And also condensation not comes on the screen

i cant view m photos

If u look in ur manual it tells u that its a self-diagnosis code!
Step 1: eject the casset and then put it back in record something
step 2:disconnect the power cord of the AC adapror or remove the battery.
step 3: reconect the power or battry and record
step 4: Replace the casset!

thats a breakdown of the manuals instructions

hope this helps
ilewis

there are mechanical problem of your camera...may be one of the motor is stuck up...check the drum motor if free wheeling..is it the common problem of that model