I cannot get information regarding the use of EPG. After I configure the program guide and download the channels I get a list, which I never see again after I continue to the next step.
So what is the purpose of EPG. Please help.
Thank you for your assistance
P.S. I use the Pinnacle Pctv Pro Hard Stick(801e)
EPG or Electronic Programme Guide is the on-screen version of a tv guide for digital tv. The remote control usually has a dedicated button for the display of the EPG.
The information displayed is often incomplete and some digital boxes or tv sets perform better than others though in theory it needs no setting up. Once the box has searched and made a channel list the programme guide will be available.
SOURCE: I have a tv tuner card pinnacle studio PCTV pro 4.0 my driver CD
which top of the range tv tuner you can recommend for my pc( FUJITSU, Pentium 4, 3 ghz, 512ram
SOURCE: Pinnacle PCTV pro stick 801e
Hi Adam,
Here is the link for tv center pro for your vista 64 bit download and install this to your computer. http://cdnexpress.pinnaclesys.com/akdlm/SupportFiles/TVCenter/TVC540/PinnacleTVCenterProSetup_5.4.0.3032.exe.
I suggest also to connect your tuner device at any usb port.
By the way you need the serial number for the new tv center pro.
Enjoy.
SOURCE: my Pinnacle PCTV HD Pro Stick (801e) USB TV Tuner isn't working
This page contains drivers for all of the Pinnacle TV products, scroll down to 801e (if that is indeed your model) and select the appropriate OS download. The instructions should be in the zip file...
If you still have problems post additional info under this thread so we can follow up with you.
SOURCE: I Just installed my 801e pctv stick on th atenna
Check the configuration menus - they should have an orientation setting area.
SOURCE: Hello, Some of the channels on
Hello, Tommy Faust with DISH Network here. I'm sorry your guide is showing you incorrect information.
What may fix it is a hard reset where you unplug the receiver from the power outlet for 15 seconds and plug back in. If that doesn't work then try a check switch test. Go into Menu - 6 (System Setup) - 1 (Installation) - 1 (Point Dish) and select check switch then select test.
If you are still having the issue or any further questions feel free to ask here.
266 views
Usually answered in minutes!
×