At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
When I plug my USB flash drive into my PC, the computer doesnt detect that its in the USB port. Therefore, I cant access any of my files on my flash drive. I need to know how I can access these files so I can, at least, store them on another storage device.
the light on my 4GB usb turns on for about 3 seconds then turns off. the computer seems to know it was plugged in but i cannot access it.the light on my 4GB usb turns on for about 3 seconds then turns off. the computer seems to know it was plugged in but i cannot access it.
You can't post conmments that contain an email address.
I) try to put the usb drive in some other ports(such as usb port present on the backside of yur computer tower) and check whether your computer is detecting the drive.....
ii) if not there is sureluy some problem with ur usb drive, replace it or repair it..., you can even try putting another usb drive(if you have an spare one...)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solutionto determinethe cause ofdamage: 1.Ifyouhave a USB mouse, use themouse tocheck thedamage tothe USBport.Example:connect themouseto theUSB 1,USB 2,USB3 orUSB4.IfeveryUSB port,mouseis detected, the conclusionnormal USBport 2.To check yourcomputer's drivers, right-clickMy Computer-Properties- Hardware-DeviceManager
3.Ifpoints1 and 2 arenormal,the possibility offlashdrivedamaged. Because thenewflashdrive,flashdriveis most likelynormal.Based on experience,causedamage tothe flashdrive is aUSBport isdirty.The USB portis dirty,cancauseshort-circuitflash drive.The characteristics ofshort-circuitflashdrive.Wheninsertedintoa USBflash drive(about 5seconds),the temperature ofthe flash drivebecomeextremelyhot.Ifthere are problemslikethis,immediatelyunplug theflashdrive,topreventpermanent damage.
Disconnect the flash drive from your computer, then plug it into a different USB port. On occasion some USB ports do not detect inserted equipment (either because the port is damaged or because the flash drive is not supported by the particular connection).
Connect the flash drive after the computer has powered on. If you plug the drive into the computer before starting the system, the computer may not detect the USB device.
Open an Internet browser and navigate to the drive manufacturer's website. Although most USB flash drives are plug-n-play, the computer may not have the appropriate drivers installed, which means you must install the driver before the system can use the flash drive.
Select the "Support" option, then choose "Drivers and Downloads". Click on the model of flash drive you are using, then the operating system. Click on the driver download link and wait for the driver to download to the computer. Double-click the downloaded file to load the installation wizard. Accept the license agreement, then follow the prompts to install the driver. Restart the computer and the system is ready to use the USB flash drive.
try another usb port 1st,preferably on the back side of the pc.If it still doesnt work try it on another pc.if it doesnt work on aother pc its more than likely bad.
First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.
Also if it came with an external power, connect it to the external power before putting on your PC.
This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.
After making sure about this, power up your system, and plug the flash drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your flash drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your Flash Drive to be detected automatically.
First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.
Also if it came with an external power, connect it to the external power before putting on your PC.
This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.
After making sure about this, power up your system, and plug the external drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your external drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your external Drive to be detected automatically.
First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.
Also if it came with an external power, connect it to the external power before putting on your PC.
This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.
The link to the driver that you requested is this: http://www.simpletech.com/support/support_downloads.php
if it still doesnt work after doing all these, power up your system, and plug the external drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your flash drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your Flash Drive to be detected automatically.
First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.
Also if it came with an external power, connect it to the external power before putting on your PC.
This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.
After making sure about this, power up your system, and plug the flash drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your flash drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your Flash Drive to be detected automatically.
You can also try it out on a friend's system.
Kindly keep me posted about the problem and let me know how it goes.
First of all make sure that the USB port that you are using to connect it to your PC is a USB 2.0 port, and not USB 1.0.
This is because the voltage supplied by USB 1.0 is lower than that of USB 2.0 and therefore might not be enough to power up your USB Drive.
After making sure about this, power up your system, and plug the flash drive, then Right-Click on my computer icon, select manage, then go to Disk Management Option.
On the Disk management option Page you should see ALL the drives installed on your system, including the hidden ones, so what you will just do is, try and locate the one representing your flash drive, and right click on it. then select "Change Drive letter and Paths", and give the drive any new, unique letter (i.e alphabet) different from the ones already on your system, and click on OK.
This should make your Flash Drive to be detected automatically.
Check it on another computer. if it still doesnt work then your backup
is gone. if it does work maybe you should take it in. also try other
accessories in that same port. if other stuff doesnt work then you'll
probably need to fix the port. also check the drive on any USB ports in the back of you
pc.
ugs it sucks
I PLUG INTO THE USB SLOT I CANNOT GET ANYTHING TO SHOW ON THE COMPUTER
Please tell me the OS.
the light on my 4GB usb turns on for about 3 seconds then turns off. the computer seems to know it was plugged in but i cannot access it.
×