At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
display flashes sensing but wont turn ondisplay flashes sensing but wont turn on
AnonymousMar 29, 2014
display goes dead for a few days then comes back for a few days before going dead againdisplay goes dead for a few days then comes back for a few days before going dead again
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1H= 1 hour delay. press the cancel button and then run the dryer with the vent tube off as if it is not drying like it use to then the vent is restricted, note this has nothing to do with the 1H. You will need to clean the vent tube out and you may want to clean the dryer out,also. You will be amazed how much lint is inside the dryer. Good Luck Tim
If there were no problems before replacing drum I would go back and make sure all 3 wiring connections are made behind the door panel. From there this machine is too complex to diagnose over the phone.
unplug the unit for a period of time(2 hrs.) to possibly clear memory, unless they are "Hard-Codes" and can't be erased w/o finding out the service code from g.e.
open top and check connections, unplug power and reconnect after done. if this does not solve it then I would replace display board. this dryer is made by LG, controls should be good.
Have you access the dryers service mode? If not, access it and see what error code you get. Follow this:
1. Press the POWER key to turn the dryer on. 2. Press HELP. The main help screen is displayed. 3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds. Press EXIT to return to the HOME screen.
Once you know the error code, post it or email me and I can help you from there. [email protected]
display flashes sensing but wont turn on
display goes dead for a few days then comes back for a few days before going dead again
×