Fault f2 photo copier showing fault f2

replace the toner cartridge with a new OEM not third party

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the third party toner cartridge with a OEM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

F2 fault code

Below are the F2 errors and causes for Sharp AR-M160

"F2-31" Image density sensor fault
"F2-32" Drum mark sensor fault
"F2-33" Grid voltage correction problem
"F2-35" Grid voltage correction problem
"F2-37" Drum mark sensor fault

Cause : CRUM chip defect OR Improper developing unit
Check and remedy : As you have already replaced the tonner, we can suggest Replace the CRUM chip,Replace the developing unit

Regards,
Shrey

F2 40 = ATC sensor abnormality

Check e remedy :
Remove/Install the toner cartridge again.
Replace the toner cartridge with a normal one.

toner type error

replace the toner cartridge

During installation , use sharp ar205 developer and sharp ar021 toner cartridge. This shows you did not use developer or used the wrong ones, good luck.

Need to know what machine it is you have

there Should be 2 additional numbers. F2-??

"F2-31" Image density sensor fault "F2-32" Drum mark sensor fault "F2-33" Grid voltage correction problem "F2-35" Grid voltage correction problem "F2-37" Drum mark sensor fault