I had dried one load of clothes and was getting ready to put in another load when I noticed that the light inside was out. I went ahead and put the wet clothes in the dryer thinking it was only the light that had blown out but when I tried to start the dryer....nothing happened.
Thanks.
Yuvon
p.s. I don't find our product listed here. We have a Maytag Performa Plus Model# PYE4500AYW. I've selected the PAV2200 since ours wasn't listed. Thanks.
SOURCE: maytag dryer won't heat up
i am having the exact same problem with this model as well just happened 4 days ago.
SOURCE: Maytag Performa Dryer Mod PYE4500AYW Has power but will not start
check your door switch. if it is ok, get this kit part number LA-1053. This is a very common solution for this dryer. the thermostat fix kit will contain a thermostat and two other parts....one is for gas and the other is for electric. just read the instructions and you will know what one is for your dryer. these parts can be accessed by lifting the lid and looking to the rear of the cabinet past the drum. MAKE SURE TO UNPLUG THE DRYER FIRST
SOURCE: replace belt on pye4500ayw
i lifted up the top and unscrewed the front of my maytag dyer pye4500ayw a very thin belt was at the bottom. who do i replace this belt and where does it go?
SOURCE: maytag performa PAV2200 - cold water fill does not
Try removing the cold water supply hose at the back of the machine. There are usualy screnes in the connection inside the water inlet valve that you can pull out. Look inside the threaded fitting on the machine. Clean and replace it. If that is not it. Open the cold water valve and make sure your home water supply flows through the hose. Check the wires at the water inlet valve on the cold side for voltage (inside the machine) when trying to operate in cold water fill cycle. You can also run it on hot and check the voltage for comparison if you aren't sure of what voltage you are looking to have. If it powers up on the cold fill, then the inlet valve is bad and needs replaced. Be cautious as there is AC power that can kill when testing.
SOURCE: maytag performa washer grinding noise
Sounds like the water pump is going out on it. The part runs about $80 and should only take about 45 minutes to install.
98 views
Usually answered in minutes!
I have Maytag Performa Dryer PYE4500ayQ I had put a load of clothes in to dry and it was working. When i went back later to put another load in that i just washed i opened the dryer door and the first load had only paprtially dryed. The dryer would not come back on and the light was not on. The electric breaker was on the dryer just would not work.. Please help me with this, as i love my dryer.
Kim [email protected]
If anyone has an aswer to the problem that the three of us are having then please let us know asap. One minute the dryer was running great and the next it won't do anything. Light is out and doesn't attempt to do anything. Thanks.
Buck
[email protected]
636-485-5803
×