Replacement seals for Senseo Coffee machine

That's one for the repair shop, really. The seal is usually bent inwards so it can withstand the pressure of the hot water, but once it's able to flex out it needs to be replaced.

well you may find this link helpful have also sent you the link in your mail if your details match you will be able to exchange it rather than going it for repairs hope this helps http://www.usa.philips.com/service/senseo/index.page

Plenty on Ebay at the moment:

http://shop.ebay.co.uk/i.html?_nkw=senseo+double+holder&_sacat=0&_trksid=p3286.m270.l1313&_dmpt=Coffee_Machines_Makers&_odkw=senseo+holder&_osacat=0

You may find that the plastic disc on the bottom of the pod holder is not sealing (there is an O ring) ,if the amount of coffee dispensed is more than usual that will be the problem,just buy a new pod holder.

go to this page to confirm if your coffee maker is included in the recall

http://www.usa.philips.com/service/senseo/index.page

please take a moment to rate this solution... thanks

Call senseo at 866-4-736-736 and describe the problem. it is the seaing mechanisim at the top brewwing portion that is loose, either you are not closing it right or the pressure is getting too high forthe seal.

if you have purchased or received it as a gift less than two years ago they will send a new one.

Call senseo at 866-4-736-736 866-4-Senseo and describe the problem. it is the seaing mechanisim at the top brewwing portion that is loose, either you are not closing it right or the pressure is getting too high forthe seal.

if you have purchased or received it as a gift less than two years ago they will send a new one FREE.

Call senseo at 866-4-736-736 866-4-Senseo and describe the problem.
if you have purchased or received it as a gift less than two years ago they will send a new one FREE.

The best place for spare parts are on internet order. Search for sites in your country in google with the part number 4222 247 35790.

The pod holder has an O ring to seal the black plastic disc in,if it is not sealed you will end up with more volume and a weaker coffee without the foam,either knock the disc out and try and seat the O ring and then knock it back in or buy a new pod holder,I had this same problem