Im using intel desktop board now bios are not loaded. what can i do for this.

SOURCE: PLEASE

it's the driver that the motherboard need to make use of the PCI slots, so as you can connect cards into the slot, otherwise the cartd would not work.

As E210822 is not a good intel number, go here and find your motherboard

SOURCE: intel DG31PR mother board hanged after bios update

Try this and read the "Instructions for Recovery BIOS Updates" section.
http://downloadmirror.intel.com/17084/eng/BIOS%20Update%20Readme.pdf
Good luck.

SOURCE: Boot up beep codes, intel d845glly

here is a list of all beep codes : http://www.cas411.com/ShowArticle.aspx?ID=54
try to identify the beep pattern, it should tell you what's wrong. Most of the time, it's a bad memory stick.

Alex

Sudeep Chatterjee

• 3267 Answers
• Posted on Mar 19, 2009

SOURCE: current system is not an Intel(R) Desktop Board. -(A044412A)

Does'nt your MB CD have the drivers. Otherwise ask the supplier to provide you one....sodeep

SOURCE: Won't boot, display stuck at Intel desktop board, can't go to BIOS

I had this exact same problem, turns out i just needed to unplug a couple USB devices that were conflicting with the startup. It worked inexplicably well. If you have an external HD i'd start by unplugging that, then other accessories.