When i go to the internet, it say, Communication error! Check you have coverage and try again.Contact your operator if the problem persists.(006) WHAT THAT MEAN???? PLZ HELP!!

Check the Display: Look at the meter's display to confirm that it's showing an EO1 error. This is usually an indication of a communication or programming issue.
Power Cycle: Turn off the power to the Conlog meter and wait for a few seconds. Then, turn the power back on. This simple step can sometimes resolve communication errors.
Check the Wiring: Ensure that the wiring connections to the meter are secure and not damaged. Loose or damaged wires can cause communication issues.
Contact Customer Support: If the EO1 error persists, it's a good idea to contact Conlog customer support or your utility company for assistance. They may have specific instructions for your meter model or may need to send a technician to resolve the issue.
Restart the Meter: Depending on the specific model, there might be a reset or restart button on the meter. Refer to the user manual or contact customer support for instructions on how to use this feature.
Update the Firmware: In some cases, updating the firmware of the Conlog meter may help resolve communication errors. Again, consult the user manual or contact customer support for guidance on how to do this.

Error code 08 in a Kyocera FS-1020MFP printer is a communication error and can be resolved by trying the following steps:

1. Check the cable connections: Make sure that the cable connections between the printer and computer are secure and properly connected.
2. Restart the printer: Turn off the printer and then turn it back on. This can often resolve communication errors.
3. Try a different cable: If the error persists, try using a different cable to connect the printer to the computer.
4. Update the printer driver: Make sure that you have the latest printer driver installed on your computer. You can download the latest driver from the Kyocera website.
5. Reset the printer: Perform a reset on the printer by unplugging it from the power source for a few minutes and then plugging it back in.
6. Check the computer's firewall settings: If the error persists, check the firewall settings on your computer to make sure that it is not blocking communication with the printer.
7. Contact Kyocera support: If the error continues to persist, contact Kyocera support for further assistance. They will be able to provide more specific guidance for resolving the error.

This error may occur if there is a network maintenance or outage. Please click here to check our Network Maintenance / Operational Status page.
If you receive this error code, please try again.
If the issue persists, review your DNS settings, and update the settings to auto-obtain. [How to]
If this is already set to auto-obtain, you may try entering an alternate DNS, such as Google's DNS. [How to]


for more help visit CBR Tech Solutions

what is your operating system???if it is windows xp .try to unplug your unplug your modem for about 100 seconds and plug it again. if it persist. try to clean your modem. scan your computer for viruses, viruses delete some of your system configuration. check for wires. disconnect and reconnect wires. if it persist contact the retailer of the device or the manufacturer.

http://support.dell.com/support/edocs/systems/5100cn/en/UG/section18.html
see this page for detail, i hope this helpfull, if you think this helpfull please rate very helpfull or helpfull. thanks for using fixya

The communication error may due to,
1.network may be busy or no coverage.
2.may be the SIM card is invalid.
3.access point name setting may not be correct.
4.check date time setting.
5.if there is no problem with all these,select setting-select configuration-preferred access point-select internet.
6.please contact your service provider.

Hi:
here is my advice : Just go to www.microsoft.com and download internet explorer again and install it , then reboot your system . I'm sure that this will solve the problem . any way , why don't you try other internet communication softwares like ( firefox or google chrome) those both are great also . I advice you to have more than one internet communication software . I already have three just in case if one of them is corrupted . I have ( Internet explorer and firefox and google chrome ) . just try the idea and you'll be satisfied with the result .

If that didn't help then try to check system for errors . such as registry errors .
good luck .

if none of those didn't work , then repair the the system or reinstall it again , i recommend repairing .


rate if useful please !

Info on fix: -

http://www.pc-library.com/errors/error-code/652-0x28C/

here is my advice : Just go to www.microsoft.com and download internet explorer again and install it , then reboot your system . I'm sure that this will solve the problem . any way , why don't you try other internet communication softwares like ( firefox or google chrome) those both are great also . I advice you to have more than one internet communication software . I already have three just in case if one of them is corrupted . I have ( Internet explorer and firefox and google chrome ) . just try the idea and you'll be satisfied with the result .

If that didn't help then try to check system for errors . such as registry errors .
good luck .

rate if useful please !